Numerical analysis of high-efficiency lead-free perovskite solar cell with NiO as hole transport material and PCBM as electron transport material

被引:18
作者
T. R. Lenka
A. C. Soibam
K. Dey
T. Maung
F. Lin
机构
[1] National Institute of Technology Silchar,Microelectronics and VLSI Design Group, Department of Electronics and Communication Engineering
[2] University of Cambridge,Cavendish Laboratory, Department of Physics
[3] National University of Singapore,Solar Energy Research Institute of Singapore
[4] National University of Singapore,Department of Electrical and Computer Engineering
关键词
Lead free perovskite; NiO; PCBM; Solar cell; SCAPS;
D O I
10.1007/s40012-020-00291-7
中图分类号
学科分类号
摘要
In this work a lead free perovskite solar cell structure is proposed with NiO as the hole transport material (HTM), CH3NH3SnI3 as the perovskite absorber material and PCBM (phenyl C61 butyric acid methyl ester) as the electron transport material (ETM). Numerical analysis of the designed solar cell is performed using Solar Cell Capacitance Simulator (SCAPS-1D) program. The power conversion efficiency (PCE) of the optimized device stack is found to be above 29% with Voc = 0.98 V, Jsc = 34.86 mA/cm2, FF = 85.64%. The lead free perovskite solar cell with different HTM and ETM may be investigated for high PCE.
引用
收藏
页码:111 / 116
页数:5
相关论文
共 50 条
  • [31] Simulation of perovskite solar cells by using CuSCN as an inorganic hole-transport material
    Hazeghi, Farzaneh
    Ghorashi, Seyed Mohamad Bagher
    MATERIALS RESEARCH EXPRESS, 2019, 6 (09)
  • [32] Achieving high-efficiency perovskite-based solar cells through engineering hole-transport layer
    Bai, Xilong
    Tang, Hongxia
    Yang, Qian
    Wang, Yinghui
    Shokri, Amir Masoud
    MATERIALS CHEMISTRY AND PHYSICS, 2023, 304
  • [33] Strategic integration of electron transport layer for high-performance optimized lead-free double perovskite solar cells with temperature dependence
    Aslam, Fawad
    Rehman, M. Israr Ur
    Riaz, Junaid
    Masmoudi, Atef
    JOURNAL OF INFORMATION DISPLAY, 2024,
  • [34] Inorganic Lead-Free Cs2AuBiCl6 Perovskite Absorber and Cu2O Hole Transport Material Based Single-Junction Solar Cells with 22.18% Power Conversion Efficiency
    Kale, Abhijeet J.
    Chaurasiya, Rajneesh
    Dixit, Ambesh
    ADVANCED THEORY AND SIMULATIONS, 2021, 4 (03)
  • [35] An investigation on organic and inorganic materials for hole transport layer in lead-free third-generation solar cell
    Riya Sen
    Menka Yadav
    Journal of Optics, 2023, 52 : 672 - 682
  • [36] An investigation on organic and inorganic materials for hole transport layer in lead-free third-generation solar cell
    Sen, Riya
    Yadav, Menka
    JOURNAL OF OPTICS-INDIA, 2023, 52 (02): : 672 - 682
  • [37] Investigation of photovoltaic performance of lead-free CsSnI3-based perovskite solar cell with different hole transport layers: First Principle Calculations and SCAPS-1D Analysis
    Ravidas, Babban Kumar
    Roy, Mukesh Kumar
    Samajdar, Dip Prakash
    SOLAR ENERGY, 2023, 249 : 163 - 173
  • [38] Lead-free organic inorganic halide perovskite solar cell with over 30% efficiency
    Islam, Md. A.
    Bin Alamgir, Md. N.
    Chowdhury, S. I.
    Billah, S. M. B.
    JOURNAL OF OVONIC RESEARCH, 2022, 18 (03): : 395 - 409
  • [39] Efficiency Enhancement of Inverted Structure Perovskite Solar Cells via Oleamide Doping of PCBM Electron Transport Layer
    Xia, Fei
    Wu, Qiliang
    Zhou, Pengcheng
    Li, Yi
    Chen, Xiang
    Liu, Qing
    Zhu, Jun
    Dai, Songyuan
    Lu, Yalin
    Yang, Shangfeng
    ACS APPLIED MATERIALS & INTERFACES, 2015, 7 (24) : 13659 - 13665
  • [40] Numerical Investigation of RbGeI3-Based Lead-Free Perovskite Solar Cell with Various Cu-Based Hole Transport Layers Using SCAPS-1D
    Dharmender
    Nigam, Kaushal Kumar
    Yadav, Piyush
    Kuksal, Shrija
    Parashar, Tushar
    Chauhan, Sudakar Singh
    JOURNAL OF ELECTRONIC MATERIALS, 2025, 54 (04) : 2747 - 2765