Numerical analysis of high-efficiency lead-free perovskite solar cell with NiO as hole transport material and PCBM as electron transport material

被引：18
作者：
T. R. Lenka
A. C. Soibam
K. Dey
T. Maung
F. Lin
机构：
[1] National Institute of Technology Silchar,Microelectronics and VLSI Design Group, Department of Electronics and Communication Engineering
[2] University of Cambridge,Cavendish Laboratory, Department of Physics
[3] National University of Singapore,Solar Energy Research Institute of Singapore
[4] National University of Singapore,Department of Electrical and Computer Engineering
来源：
CSI Transactions on ICT | 2020年 / 8卷 / 2期
关键词：
Lead free perovskite; NiO; PCBM; Solar cell; SCAPS;
D O I：
10.1007/s40012-020-00291-7
中图分类号：
学科分类号：
摘要：
In this work a lead free perovskite solar cell structure is proposed with NiO as the hole transport material (HTM), CH3NH3SnI3 as the perovskite absorber material and PCBM (phenyl C61 butyric acid methyl ester) as the electron transport material (ETM). Numerical analysis of the designed solar cell is performed using Solar Cell Capacitance Simulator (SCAPS-1D) program. The power conversion efficiency (PCE) of the optimized device stack is found to be above 29% with Voc = 0.98 V, Jsc = 34.86 mA/cm2, FF = 85.64%. The lead free perovskite solar cell with different HTM and ETM may be investigated for high PCE.
引用
收藏
页码：111 / 116
页数：5
相关论文
共 50 条
  • [21] Numerical design of non-toxic high-efficiency tandem solar cell with distinct hole transport materials
    Cheragee, Sheikh Hasib
    Akhi, Jannatul Afroj
    Dev, Mishion
    Haque, Md. Mahfuzul
    Alam, Mohammad Jahangir
    THIN SOLID FILMS, 2024, 801
  • [22] Lithium Polystyrene Sulfonate as a Hole Transport Material in Inverted Perovskite Solar Cells
    Khawaja, Kausar Ali
    Khan, Yeasin
    Park, Yu Jung
    Lee, Jin Hee
    Kang, Ju Hwan
    Kim, Kiwoong
    Yi, Yeonjin
    Seo, Jung Hwa
    Walker, Bright
    CHEMISTRY-AN ASIAN JOURNAL, 2021, 16 (20) : 3151 - 3161
  • [23] HIGH-EFFICIENT SOLID-STATE PEROVSKITE SOLAR CELL WITHOUT LITHIUM SALT IN THE HOLE TRANSPORT MATERIAL
    Bi, Dongqin
    Boschloo, Gerrit
    Hagfeldt, Anders
    NANO, 2014, 9 (05)
  • [24] Solvent engineering of lead-free bismuth-based perovskite material for potential application of solar cell
    Hameed, Muhd Sahrul Nizam Sahul
    Aziz, Farhana
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 1837 - 1842
  • [25] Performance evaluation and the optimization of an inverted photo-voltaic cell with lead-free double perovskite material and inorganic transport layer materials
    Nair, Sindhu S.
    Thakur, Preeti
    Wan, Fayu
    Trukhanov, A. V.
    Panina, L. V.
    Thakur, Atul
    SOLAR ENERGY, 2023, 262
  • [26] Simulation and analysis of high-performance hole transport material SrZrS3-based perovskite solar cells with a theoretical efficiency approaching 26%
    Chawki, N.
    Rouchdi, M.
    Alla, M.
    Fares, B.
    SOLAR ENERGY, 2023, 262
  • [27] Numerical simulation of perovskite solar cell with different material as electron transport layer using SCAPS-1D software
    Bhavsar, K.
    Lapsiwala, P. B.
    SEMICONDUCTOR PHYSICS QUANTUM ELECTRONICS & OPTOELECTRONICS, 2021, 24 (03) : 341 - 347
  • [28] Theoretical Analysis of Power Conversion Efficiency of Lead-Free Double-Perovskite Cs2TiBr6 Solar Cells with Different Hole Transport Layers
    Bhojak, Vivek
    Jain, Praveen Kumar
    ENG, 2025, 6 (02):
  • [29] Low-cost lead-free inorganic perovskite photodetector with Cl@SnO2 as electron transport material and carbon as back contact
    Srivastava, Vaibhava
    Chauhan, R. K.
    Lohia, Pooja
    JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2024, 195
  • [30] Numerical modeling of planar lead free perovskite solar cell using tungsten disulfide (WS2) as an electron transport layer and Cu2O as a hole transport layer
    Kumar, Anjan
    Singh, Sangeeta
    MODERN PHYSICS LETTERS B, 2020, 34 (24):
12345