High-pressure, laser-driven deformation of an aluminum alloy

Recent development of a laser-based experimental platform allows loading materials to high pressures in the solid state while controlling both strain rate and peak pressure. The drive utilizes momentum transfer from a plasma generated by the introduction of a strong shock in a reservoir of low-Z material. This study looks at the response of a commercial aluminum alloy (6061-T6) subjected to pressures of 18 and 40 GPa at strain rates of 107/s and 5 × 107/s, respectively. It was found that the depth of the crater formed on the sample surface is a good indicator of the general yield behavior of the material and that a relatively simple strength model prevails under the loading conditions considered here. Metallographic examination of recovered samples showed no evidence of shear-band formation or significant melting due to plasma-surface interactions. Crystal plasticity-based calculations were used to assess the effects of material texture. Lack of shear-band formation during the laser-based drive is rationalized by considering the strain gradient as compared to grain size and texture.