Mechanical properties and microstructure of Al2O3/mullite composite

被引：1
|
作者：
F. C. Zhang
H. H. Luo
S. G. Roberts
机构：
[1] Yanshan University,State Key Laboratory of Metastable Materials Science and Technology
[2] University of Oxford,Department of Materials
来源：
Journal of Materials Science | 2007年 / 42卷
关键词：
Fracture Toughness; Flexural Strength; Reaction Sinter; Al2O3 Powder; Quantitative Phase Analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An Al2O3/5 vol.% mullite composite was synthesized by using reaction sintering of Al2O3/0.78 wt.% SiC at 1,600 °C for 2 h in air. The phase analysis of the Al2O3/mullite composite was carried out using X-ray diffraction (XRD). There were two kinds of mullite in alumina/mullite composite, namely, 3Al2O3·2SiO2 and Al5.65Si0.35O9.175. The microstructure of the Al2O3/mullite composite was investigated using scanning electron microscope (SEM) and transmission electron microscope (TEM). The mechanical properties such as Young’s modulus, Poisson’s ratio, hardness, toughness and strength of the Al2O3/mullite composite were investigated. The influence of mullite on the composite is discussed.
引用
收藏
页码：6798 / 6802
页数：4
相关论文
共 50 条
  • [1] Microstructure and mechanical properties of ZrO2-40 wt% Al2O3 composite ceramics
    Abden, M. J.
    Afroze, J. D.
    Mamun, M. A.
    Haque, M. M.
    MATERIALS EXPRESS, 2014, 4 (04) : 317 - 323
  • [2] Influence of Al2O3 addition on microstructure and mechanical properties of 3YSZ-Al2O3 composites
    Abden, Jaynul
    Afroze, Jannatul Dil
    Gafur, Abdul
    Chowdhury, Faruque-Uz-Zaman
    MATERIALS TESTING, 2015, 57 (06) : 499 - 505
  • [3] Effects of CNTs content on microstructure and mechanical properties of Cnt/α-Al2O3 and Cnt-Csf/α-Al2O3 composites
    Jia, Jiangang
    Liu, Diqiang
    Zhang, Sheng
    Zhang, Bo
    Liu, Shunwei
    Ji, Genshun
    CERAMICS INTERNATIONAL, 2019, 45 (16) : 19956 - 19961
  • [4] Effect of Al2O3 content and swaging on microstructure and mechanical properties of Al2O3/W alloys
    Wang, Changji
    Zhang, Laiqi
    Pan, Kunming
    Wei, Shizhong
    Wu, Xiaochao
    Li, Qingkui
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2020, 86
  • [5] Microstructure and mechanical properties of a directionally solidified Al2O3/Y3Al5O12/ZrO2 hypoeutectic in situ composite
    Su, Haijun
    Zhang, Jun
    Liu, Lin
    Fu, Hengzhi
    COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (15-16) : 2657 - 2667
  • [6] Influence of Al2O3 whisker concentration on mechanical properties of WC-Al2O3 whisker composite
    Dong, Weiwei
    Zhu, Shigen
    Bai, Tao
    Luo, Yilan
    CERAMICS INTERNATIONAL, 2015, 41 (10) : 13685 - 13691
  • [7] Mechanical properties and microstructures of Nano-Al2O3 particles reinforced Al2O3/AlN composite
    Li, Qinggang
    Wu, Chao
    Wang, Zhi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 636 : 20 - 23
  • [8] Mechanical properties of Al2O3/Al multilayer ceramics
    College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
    不详
    Rengong Jingti Xuebao, 2009, 1 (133-137+147):
  • [9] Fabrication and mechanical properties of α-Al2O3/β-Al2O3/Al/Si composites by liquid displacement reaction
    T. Watari
    T. Torikai
    W.-P. Tai
    O. Matsuda
    Journal of Materials Science, 2000, 35 : 515 - 520
  • [10] Microstructure and mechanical properties of Al2O3 matrix nanocomposites produced by solid state precipitation
    Mukhopadhyay, Amartya
    Todd, Richard I.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2010, 30 (06) : 1359 - 1372
12345