Improving machinability of titanium alloy by electro-pulsing treatment in ultra-precision machining

被引：1

作者：

Yonggou Lou

Hongbing Wu

机构：

[1] Ningbo Polytechnic,School of Haitian

[2] Zhejiang University,College of Mechanical and Energy Engineering, Ningbo Institute of Technology

来源：

The International Journal of Advanced Manufacturing Technology | 2017年 / 93卷

关键词：

Ultra-precision machining; Electro-pulsing treatment; Machinability; Surface roughness; Titanium alloy;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Titanium alloys have promising properties for optical applications but are difficult to machine. This paper proposes a new method for improving the machinability of titanium alloys in ultra-precision machining by applying electro-pulsing treatment (EPT). EPT is carried out to improve the plasticity of a typical titanium alloy, Ti6Al4V. Hardness and compression tests confirmed that yield stress and hardness are both reduced after EPT. Finite element modelling and ultra-precision machining were performed to study the machinability of Ti6Al4V before and after EPT. Lower cutting forces with lower power spectral densities, more continuous chips and better surface finish were obtained after EPT.

引用

页码：2299 / 2304

页数：5

共 50 条

[31] Ultra-precision machining induced surface structural changes of Zn-Al alloy [J].

To, S ;

Lee, WB ;

Zhu, YH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 325 (1-2) :497-502

[32] Simulation-based investigation on ultra-precision machining of additively manufactured Ti-6Al-4V ELI alloy and the associated experimental study [J].

Manjunath, K. ;

Tewary, Suman ;

Khatri, Neha ;

Cheng, Kai .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024, 238 (10) :1554-1567

[33] New approaches for an automated production in ultra-precision machining [J].

C. Brecher ;

M. Weinzierl .

The International Journal of Advanced Manufacturing Technology, 2010, 47 :47-52

[34] Monitoring life of diamond tool in ultra-precision machining [J].

C. Y. Chan ;

L. H. Li ;

W. B. Lee ;

H. C. Wong .

The International Journal of Advanced Manufacturing Technology, 2016, 82 :1141-1152

[35] Effect of cold metal transfer mode on the microstructure and machinability of Ti-6Al-4V alloy fabricated by wire and arc additive manufacturing in ultra-precision machining [J].

Gou, Jian ;

Wang, Zhijiang ;

Hu, Shengsun ;

Shen, Junqi ;

Liu, Zhengjun ;

Yang, Chao ;

Bai, Yuchao ;

Lu, Wen Feng .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 :1581-1594

[36] A mesoplasticitiy analysis of cutting friction in ultra-precision machining [J].

Lee, WB ;

Cheung, CF ;

To, S .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 :292-297

[37] Advances in ultra-precision machining of bearing rolling elements [J].

He, Chunlei ;

Zhang, Jing ;

Geng, Kun ;

Wang, Shuqi ;

Luo, Meijun ;

Zhang, Xiaona ;

Ren, Chengzu .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (9-10) :3493-3524

[38] Ultra-precision machining for micro structural functional surfaces [J].

Cai, Hongbin ;

Shi, Guoquan .

2018 3RD INTERNATIONAL CONFERENCE ON MECHANICAL, CONTROL AND COMPUTER ENGINEERING (ICMCCE), 2018, :277-280

[39] Anisotropy Research of Ultra-precision Machining on KDP Crystal [J].

Zhang Wensheng ;

Cao Yongzhi ;

Wang Jinghe ;

Gao Yan ;

Zhou Ming .

5TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES, 2010, 7655

[40] Crack removal behavior in ultra-precision machining of sapphire [J].

Nagaraj, Aditya ;

Kwon, Suk Bum ;

Yoon, Hae-Sung ;

Min, Sangkee .

47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47), 2019, 34 :393-398

← 1 2 3 4 5 →