Effect of machining area on material removal rate in strip EDM

被引：0
|
作者：
Ki Young Song
Chong Nam Chu
机构：
[1] Sharp Engineering,Department of Mechanical and Aerospace Engineering
[2] Seoul National University,undefined
来源：
International Journal of Precision Engineering and Manufacturing | 2015年 / 16卷
关键词：
Electrical discharge machining; Electrode; Wear;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Strip EDM is similar to wire EDM, except that the electrode is a roll of brass strip. In this study, investigated is the effect of machining area on material removal rate (MRR) in strip EDM, The MRR was measured according to different machining areas and different electrical discharge conditions. For a given discharge condition, optimal machining area for maximum MRR was identified. The optimal machining area was larger under higher discharge energy condition. It is shown that strip EDM is much more efficient than wire EDM because material removal rate is much higher and the electrode consumption is much less.
引用
收藏
页码：2435 / 2440
页数：5
相关论文
共 50 条
  • [41] Enhancement of material removal rate in Electric Discharge Machining of Inconel 718 using cryo-treated graphite electrodes
    Tharian, B. K.
    Dhanish, P. B.
    Manu, R.
    MATERIALS TODAY-PROCEEDINGS, 2021, 47 : 5172 - 5176
  • [42] Effect of Electrode Route Motion on Electrode Wear in EDM Machining of Mold Steel
    Dyi-Cheng Chen
    Yi-Kai Wang
    Geng-Fu Lin
    Arabian Journal for Science and Engineering, 2013, 38 : 2793 - 2800
  • [43] Effect of Electrode Route Motion on Electrode Wear in EDM Machining of Mold Steel
    Chen, Dyi-Cheng
    Wang, Yi-Kai
    Lin, Geng-Fu
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2013, 38 (10): : 2793 - 2800
  • [44] A study of the material removal mechanism of polycrystalline diamond in electrical discharge machining based on spectroscopic measurement
    Liu, Jialin
    Deng, Fuming
    Lu, Xuejun
    Deng, Wenli
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (1-4): : 697 - 704
  • [45] Investigation of Electrical Discharge Machining Efficiency with Cryogenic Copper Electrodes for AISI D2 Steel: Enhancing Material Removal Rate, Reducing Electrode Wear Rate, and Minimizing Machining Time
    Selvarajan, L.
    Elango, T.
    Kannan, P. R.
    Perumal, K. P. Srinivasa
    Arun, C.
    Sadhishkumar, S.
    Kannan, S.
    Muthusamy, P.
    Sakthivel, G.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [46] EFFECT OF THE TOOL SURFACE AREA AND WORKPIECE VIBRATION ON THE μEDM PERFORMANCE
    Unune, Deepak Rajendra
    SURFACE REVIEW AND LETTERS, 2021, 28 (10)
  • [47] Study on material removal mechanism in EDM process through observation of resolidification of molten metal
    Hayakawa, Shinya
    Minoura, Kazuaki
    Itoigawa, Fumihiro
    Nakamura, Takashi
    19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2018, 68 : 266 - 271
  • [48] Material removal and surface damage in EDM of Ti3SiC2 ceramic
    Hu, C. F.
    Zhou, Y. C.
    Bao, Y. W.
    CERAMICS INTERNATIONAL, 2008, 34 (03) : 537 - 541
  • [49] The Material Removal Rate of Metal Polishing Process
    Jeng, Yeau-Ren
    Huang, Pay-Yau
    ADVANCED TRIBOLOGY, 2009, : 1013 - +
  • [50] Investigation of the material removal process in counter-rotating electrochemical machining
    Wang, Dengyong
    He, Bin
    Zhu, Zengwei
    Zhu, Di
    19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2018, 68 : 704 - 708
12345