Influence of the Polishing Conditions on the Final Quality of a Single Crystal

被引：0

作者：

Muratov K.R. ^{[1
]}

Gashev E.A. ^{[1
]}

Ablyaz T.R. ^{[1
]}

机构：

[1] Perm National Research Polytechnic University, Perm

来源：

Muratov, K.R. (karimur_80@mail.ru) | 1600年 / Pleiades journals卷 / 40期

关键词：

polishing; polishing time; pressure; productivity; single crystals; speed; surface roughness;

D O I：

10.3103/S1068798X20100172

中图分类号：

学科分类号：

摘要：

Abstract: The polishing of a lithium-niobate single crystal is considered. The influence of the pressure and relative speed in polishing on the productivity and the final quality of the crystal’s end surfaces is investigated. Formulas are derived for the total depth of the layer destroyed in finishing and the minimal time required for its removal. © 2020, Allerton Press, Inc.

引用

页码：862 / 864

页数：2

共 6 条

[1] Vinokurov V.M., Issledovanie Protsessa Polirovki Stekla (Analysis of Glass Polishing Processes), (1967)
[2] Kumanin K.G., Formoobrazovanie opticheskikh poverkhnostei (Forming of Optic Surfaces), (1962)
[3] Okatov M.A., Spravochnik optika-tekhnologa (Handbook of Optician-Technologist), (2004)
[4] Artemov A.S., Polishing nanodiamonds, Phys. Solid State, 46, pp. 687-695, (2004)
[5] Muratov K.R., Ablyaz T.R., Gashev E.A., Depth of the disintegrated layer in the abrasive finishing of single crystals, Stanki Instrum., 5, pp. 8-10, (2019)
[6] Muratov K.R., Ablyaz T.R., Gashev E.A., Depth of the disintegrated layer in the abrasive finishing of single crystals, Russ. Eng. Res, 39, pp. 875-877, (2019)

← 1 →