Protection of metalwork from corrosion by polyurethane coatings

被引：0

作者：

Frenkel ^{[1
]}

G.Ya. ^{[1
]}

机构：

来源：

Hydrotechnical Construction | 1997年 / 31卷 / 9期

关键词：

Polyurethane; Isocyanate; Shot Peening; Polyurethane Coating; Polyurethane Resin;

D O I：

10.1007/BF02767239

中图分类号：

学科分类号：

摘要：

An overview of the properties, benefits and applications of polyurethane coatings for corrosion protection of metals. Polyurethanes of various structures with different technological, physiochemical and anti-corrosion properties can be manufactured depending on the initial components and reaction conditions. Properties can be varied within wide limits. Materials are classified as either one-component or two-component. Surface preparation requirements and technology are briefly outlined. Russia has since stopped domestic production, but uses materials from German company Steelpaint. This company has considerable experience in a range of applications and climatic zones worldwide. One-component coatings from Steelpaint have been used for anti-corrosion works on metal components of the Riga and Kegum hydroelectric power stations in Latvia.

引用

页码：583 / 585

页数：2

共 5 条

[1]

Method of Determining the Degree of Protection of Steels from Corrosion and Mechanical Destruction and in Hydrogen Sulfide-Containing Mineralized Media [in Russian], (1988)

[2]

Rozenfel'd I.L., Et al., Protecting Metal from Corrosion by Organic Coatings [in Russian], (1987)

[3]

Pakhmurskii V.I., Corrosion Fatigue of Metals [in Russian], (1985)

[4]

Ivanov E.S., Corrosion Inhibitors of Metals in Acid Media [in Russian], (1986)

[5]

Ivanov E.S., Protective properties of polyurethane coatings, Lakokrasochnye Materialy, 12, (1995)

← 1 →