Removal of wood extractives as pulp (pre-)treatment: a technological review

被引:0
作者
Maximilian Lehr
Martin Miltner
Anton Friedl
机构
[1] Technische Universität Wien,Institute of Chemical, Environmental and Bioscience Engineering
来源
SN Applied Sciences | 2021年 / 3卷
关键词
Extractives; Pulp; Removal; Treatment; Wood;
D O I
暂无
中图分类号
学科分类号
摘要
引用
收藏
相关论文
共 573 条
  • [1] Aadil KR(2016)Synthesis and characterization of Acacia lignin-gelatin film for its possible application in food packaging Bioresour Bioprocess 3 27-1312
  • [2] Barapatre A(2012)Design of process parameters for the production of xylose from wood sawdust Chem Eng Res Des 90 1307-41
  • [3] Jha H(2011)Evaluation of chemical composition of eucalyptus wood extracts after different storage times using principal component analysis J Wood Chem Technol 31 26-289
  • [4] Rafiqul ISM(1971)Distribution, properties and formation of some wood extractives Wood Sci Technol 5 272-163
  • [5] Sakinah AMM(2012)Efficiency of natural wood extractives as wood preservatives against termite attack Maderas Cienc tecnol 14 155-272
  • [6] Silverio FO(2006)Qualitative and quantitative determination of extractives in heartwood of Scots pine (Pinus sylvestris L.) by gas chromatography J Chromatogr A 1109 267-226
  • [7] Barbosa LCA(2012)Influence of impregnated metal on the pyrolysis conversion of biomass constituents J Anal Appl Pyrol 95 213-230
  • [8] Fidencio PH(2004)Combustion characteristics of different biomass fuels Prog Energ Combust 30 219-17
  • [9] Cruz MP(1997)Mineral matter effects in rapid pyrolysis of beech wood Fuel Process Technol 51 7-148
  • [10] Maltha CRA(1999)Preliminary study on products distribution in alcohol pulping of Eucalyptus globulus J Chem Technol Biot 74 141-162