On correlation of composition, structural-phase state, and properties of E635 zirconium alloy

被引：3

作者：

Markelov V.A. ^{[1
]}

机构：

[1] OAO Bochvar All-Russia Research Institute of Inorganic Materials, Moscow, 123060

来源：

Inorganic Materials: Applied Research | 2010年 / 1卷 / 3期

关键词：

Composition; Corrosion; Deformation; E635; alloy; Iron; Irradiation; Niobium; Second-phase precipitates; Structural-phase state; Tin; Viscosity;

D O I：

10.1134/S2075113310030123

中图分类号：

学科分类号：

摘要：

The results of research on the correlation of the alloying elemental content, structural-phase state, and properties prior to and after irradiation of the E635 zirconium alloy of the Zr-Nb-Sn-Fe system are generalized. The possibilities of controlling the viscosity, technological plasticity, and corrosion resistance through optimizing the content of the alloying elements and structural-phase state by virtue of development of deformation and thermal processing modes are shown. High resistance to radiation-induced deformation of the alloy results from the primary composition and the evolution of its structural-phase state under irradi- ation, in which iron plays a key role. © Pleiades Publishing, Ltd., 2010.

引用

页码：245 / 253

页数：8

共 37 条

[1]

Zaimovskii A.S., Nikulina A.V., Reshetnikov N.G., Tsirkonievye Splavy v Atomnoi Energetike (Zirconium Alloys in Nuclear Power Engineering), (1981)

[2]

Ageenkova L.E., Zaimovskii A.S., Nikulina A.V., Bull. Izobret., 28, (1992)

[3]

Nikulina A.V., Markelov P.P., Markelov V.A., Et al., (1995)

[4]

Nikulina A.V., Markelov V.A., Gusev A.Yu., Et al., Zr-1% Sn-1% Nb-0.5% Fe alloy for the pipes of technological channels of high-power channel- type reactors, Vopr. Atomn. Nauki Tekhn. Ser. Atomn. Materialoved., 36, 2, pp. 58-66, (1990)

[5]

Nikulina A.V., Markelov V.A., Peregud M.M., Bibilashvili Y.K., Kotrekhov V.A., Lositsky A.F., Kuzmenko N.V., Shevnin Y.P., Shamardin V.K., Kobylyansky G.P., Novoselov A.E., Zirconium alloy E635 as a material for fuel rod cladding and other components of VVER and RBMK cores, ASTM Special Technical Publication, 1295, pp. 785-804, (1996)

[6]

Markelov V., Novikov V., Nikulina A., Et al., Application of E635 alloy as a structural components of WWER-1000 fuel assemblies, Proc. 6th Int. Conf. WWER Fuel Performance. Modeling and Experimental Support, pp. 188-193, (2005)

[7]

Shishov V.N., Markelov V.A., Et al., Use and improvement of E635 alloy applied to fuel claddings and FA structural components of water cooled reactors, Proc. 6 Int. Symp. Contribution of Materials Investigation to Improve the Safety and Performance of LWRs, Fontevraud Royal. Abbey, 2, pp. 969-981, (2006)

[8]

Samoilov O.B., The Results of Design Exploitation and Development of Fuel Assembly of Alterative Structure for Water-Moderated Water-Cooled Power Reactor VVER-1000, pp. 2-6, (2003)

[9]

Markelov V.A., Rafikov V.Z., Nikulin S.A., Et al., The way to measure the microstructure of zirconium alloy with stanum, niobium and ferrum under thermal- deforming treatment, Fiz. Met. Metalloved., 77, 4, pp. 70-79, (1994)

[10]

Nikulin S.A., Markelov V.A., Goncharov V.I., Et al., Microstructure and mechanical properties variation during annealing of Zr-1.3% Sn-1% Nb-0.4% Fe hardened alloy, Izv. Akad. Nauk. Metally, 1, pp. 62-68, (1995)

← 1 2 3 4 →