Synthesis of surface-modified porous polysulfides from soybean oil by inverse vulcanization and its sorption behavior for Pb(II), Cu(II), and Cr(III)

被引：0

作者：

Lyu S. ^{[1
]}

Abidin Z.Z. ^{[1
]}

Yaw T.C.S. ^{[1
]}

Resul M.F.M.G. ^{[1
]}

机构：

[1] Department of Chemical and Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang

来源：

Environmental Science and Pollution Research | 2024年 / 31卷 / 20期

关键词：

Metal ions; Porous structure; Sorption; Soybean oil; Sulfur; Surface modification;

D O I：

10.1007/s11356-024-33152-w

中图分类号：

学科分类号：

摘要：

Guided by efficient utilization of natural plant oil and sulfur as low-cost sorbents, it is desired to tailor the porosity and composition of polysulfides to achieve their optimal applications in the management of aquatic heavy metal pollution. In this study, polysulfides derived from soybean oil and sulfur (PSSs) with improved porosity (10.2–22.9 m2/g) and surface oxygen content (3.1–7.0 wt.%) were prepared with respect to reaction time of 60 min, reaction temperature of 170 °C, and mass ratios of sulfur/soybean oil/NaCl/sodium citrate of 1:1:3:2. The sorption behaviors of PSSs under various hydrochemical conditions such as contact time, pH, ionic strength, coexisting cations and anions, temperature were systematically investigated. PSSs presented a fast sorption kinetic (5.0 h) and obviously improved maximum sorption capacities for Pb(II) (180.5 mg/g), Cu(II) (49.4 mg/g), and Cr(III) (37.0 mg/g) at pH 5.0 and T 298 K, in comparison with polymers made without NaCl/sodium citrate. This study provided a valuable reference for the facile preparation of functional polysulfides as well as a meaningful option for the removal of aquatic heavy metals. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.

引用

页码：29264 / 29279

页数：15

共 59 条

[1]

Abraham A.M., Kumar S.V., Alhassan S.M., Porous sulphur copolymer for gasphase mercury removal and thermal insulation, Chem Eng J, 332, pp. 1-7, (2018)

[2]

Aldahash S.A., Higgins P., Siddiqui S., Uddin M.K., Fabrication of polyamide-12/cement nanocomposite and its testing for different dyes removal from aqueous solution: characterization, adsorption, and regeneration studies, Sci Rep, 12, (2022)

[3]

Araya N., Kraslawski A., Cisternas L.A., Towards mine tailings valorization: recovery of critical materials from Chilean mine tailings, J Clean Prod, 263, (2020)

[4]

Azizighannad S., Mitra S., Stepwise reduction of graphene oxide (GO) and its effects on chemical and colloidal properties, Sci Rep, 8, (2018)

[5]

Badsha M.A.H., Khan M., Wu B., Kumar A., Lo I.M.C., Role of surface functional groups of hydrogels in metal adsorption: from performance to mechanism, J Hazard Mater, 408, (2021)

[6]

Biswas B., Warr L.N., Hilder E.F., Goswami N., Rahman M.M., Churchman J.G., Vasilev K., Pan G., Naidu R., Biocompatible functionalization of nanoclays for improved environmental remediation, Chem Soc Rev, 48, pp. 3740-3770, (2019)

[7]

Bolisetty S., Reinhold N., Zeder C., Orozco M.N., Mezzenga R., Efficient purification of arsenic-contaminated water using amyloid–carbon hybrid membranes, Chem Commun, 53, pp. 5714-5717, (2017)

[8]

Bolisetty S., Peydayesh M., Mezzenga R., Sustainable technologies for water purification from heavy metals: review and analysis, Chem Soc Rev, 48, pp. 463-487, (2019)

[9]

Chalker J.M., Worthington M.J.H., Lundquist N.A., Esdaile L.J., Synthesis and applications of polymers made by inverse vulcanization, Top Curr Chem, 377, (2019)

[10]

Cheng T.W., Lee M.L., Ko M.S., Ueng T.H., Yang S.F., The heavy metal adsorption characteristics on metakaolin-based geopolymer, Appl Clay Sci, 5, pp. 90-96, (2012)

← 1 2 3 4 5 6 →