To investigate the role of fissure angle and heat treatment temperature on the mechanical properties and deformation failure behavior, uniaxial compression tests were carried out on granite specimens containing a single fissure. Using stress–strain curves, the peak strength, peak strain, and elastic modulus of the one-fissured granite specimens were analyzed in detail. The mechanical parameters are closely related to the fissure angle and the high temperature. As the fissure angle increases from 0° to 90°, the peak strength and elastic modulus first decrease and then increase, while the peak strain increases slowly. However, the peak strength and elastic modulus first increase and then decrease, while the peak strain first decreases and then increases with increasing treatment temperature. During the experiments, the crack evolution process and acoustic emission (AE) counts were obtained using real-time photography and the AE monitoring technique. In the granite specimens containing a pre-existing fissure, large AE counts are clearly observed before the peak strength, which indicates crack initiation and propagation. The accumulated AE count first increases slowly, but is followed by a sharp increase, with increasing deformation. The AE events in the one-fissured specimen also depend on the heat treatment temperature. As the temperature increases, the rate of increase of the accumulated AE count curve is reduced. Finally, using a digital image correlation method, the full fields of surface deformation were obtained for the entire testing process. In addition, the local strain around the pre-existing fissure was measured using strain gauges. The full strain field and local strain concentration are discussed to describe the fracture mechanism of brittle granite.
