An inductive voltage divider positioned near the liner

被引：0
|
作者：
E. V. Grabovskii
V. V. Dzhangobegov
G. M. Oleinik
机构：
[1] Troitsk Institute of Innovation and Fusion Research,
来源：
Instruments and Experimental Techniques | 2012年 / 55卷
关键词：
Liner; Energy Deposition; Voltage Sensor; Voltage Profile; Liner Unit;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An inductive divider for measuring voltages near a radiating load, which is a hollow cylindrical assembly compressed by a 3-MA current pulse, is described. Some results that were obtained in experiments on the Angara-5-1 facility using this divider are presented. The nanosecond resolution of the sensor and closeness of its position to the load allow observation of the moment of breakdown of wires using the obtained voltage signals. Analysis of voltage and current signals allows evaluation of the energy deposition to the wires before the breakdown and the parameters of plasma that is generated around them.
引用
收藏
页码：574 / 579
页数：5
相关论文
共 50 条
  • [31] Inductive Voltage Divider of 600V at 400Hz
    Yuan Yafei
    Li Yalu
    Bai Xiangchun
    PROCEEDINGS OF THE THIRD INTERNATIONAL SYMPOSIUM ON TEST AUTOMATION & INSTRUMENTATION, VOLS 1 - 4, 2010, : 981 - 985
  • [32] 2 STAGE, GUARDED INDUCTIVE VOLTAGE DIVIDER FOR USE AT 100 KHZ
    HOMAN, DN
    ZAPF, TL
    ISA TRANSACTIONS, 1970, 9 (03) : 201 - &
  • [33] BINARY VERSUS DECADE INDUCTIVE VOLTAGE DIVIDER COMPARISON AND ERROR DECOMPOSITION
    AVRAMOVZAMUROVIC, S
    STENBAKKEN, GN
    KOFFMAN, AD
    OLDHAM, NM
    GAMMON, RW
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 1995, 44 (04) : 904 - 908
  • [34] AN INTERNATIONAL COMPARISON OF INDUCTIVE VOLTAGE DIVIDER CALIBRATION AT 400 AND 1000 HERTZ
    SZE, WC
    DUNN, AF
    ZAPF, TL
    IEEE SPECTRUM, 1965, 2 (03) : 79 - &
  • [35] AC Voltage Measurements to 120 V With a Josephson Arbitrary Waveform Synthesizer and an Inductive Voltage Divider
    Georgakopoulos, Dimitrios
    Budovsky, Ilya
    Benz, Samuel P.
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2019, 68 (06) : 1935 - 1940
  • [36] CALIBRATION METHOD FOR LARGE CAPACITANCES USING A CURRENT COMPARATOR WITH AN INDUCTIVE VOLTAGE DIVIDER
    Sakamoto, N.
    Nakamura, Y.
    2010 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS CPEM, 2010, : 412 - 413
  • [37] A Two-Stage Inductive Voltage Divider Using a Special Winding Method
    Tsutsumi, Shintaro
    ELECTRICAL ENGINEERING IN JAPAN, 2014, 187 (04) : 10 - 17
  • [38] Inductive Voltage Divider Ratio Measurement Based on Dual-Channel PJVS
    Jia, Zhengsen
    Zhou, Tiandi
    Wang, Lei
    Xu, Xitong
    Shi, Zhaomin
    Pan, Xianlin
    Zhang, Jiangtao
    2020 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM), 2020,
  • [39] OPTIMIZATION OF THE INTERNAL ADMITTANCE LOAD OF AN INDUCTIVE VOLTAGE DIVIDER FOR LOW RATIO ERROR
    LU, ZL
    KLONZ, M
    BERGEEST, R
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 1990, 39 (03) : 463 - 466
  • [40] Calibration of an Inductive Voltage Divider using Pulse-Driven Josephson Arrays
    Herick, J.
    Bauer, S.
    Behr, R.
    Beug, M. F.
    Kieler, O. F. O.
    Palafox, L.
    2018 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM 2018), 2018,
12345