3D Monte Carlo simulation of grain growth in friction stir welding

被引：0
作者：
Z. Zhang
C. P. Hu
机构：
[1] Dalian University of Technology,State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics
[2] Dalian University of Technology,International Research Center for Computational Mechanics
来源：
Journal of Mechanical Science and Technology | 2018年 / 32卷
关键词：
Friction stir welding; Grain growth; Monte Carlo method; Fluid turbulence model;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The 3D fluid model was used to simulate the friction stir welding process. Three-dimensional Monte Carlo model with nucleation in each MC step was then applied to simulate the grain growth. The validity of this model is verified by comparison with the experimental and numerical results. The influences of tool shoulder diameter and rotational speed are further studied. Equiaxed grains in the stirring zone are increased with the increase of the diameter and the rotation speed of the shoulder. The grain sizes tend to be more uniform from retreating side to advancing side when the rotational speed or shoulder diameter is increased.
引用
收藏
页码：1287 / 1296
页数：9
相关论文
共 50 条
  • [41] Monte Carlo simulation of grain growth in Zr processed by ECAP
    Ryoo, HS
    Yu, SH
    Oh, KH
    Hwang, SK
    TEXTURES OF MATERIALS, PTS 1 AND 2, 2002, 408-4 : 655 - 660
  • [42] Monte Carlo simulation of abnormal grain growth in two dimensions
    Messina, R
    Soucail, M
    Kubin, L
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 308 (1-2): : 258 - 267
  • [43] Development of grain structure during friction stir welding
    Fonda, RW
    Bingert, JF
    Colligan, KJ
    SCRIPTA MATERIALIA, 2004, 51 (03) : 243 - 248
  • [44] Thermomechanical simulation of friction-stir welding
    Feulvarch, Eric
    Boitout, Frederic
    Bergheau, Jean-Michel
    EUROPEAN JOURNAL OF COMPUTATIONAL MECHANICS, 2007, 16 (6-7): : 865 - 887
  • [45] Numerical Simulation of Friction Stir Welding for Dissimilar Metal Welding
    Abhinand
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (10) : 11265 - 11269
  • [46] 3D modeling of material flow in friction stir welding under different process parameters
    Zhang, H. W.
    Zhang, Z.
    Chen, J. T.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 183 (01) : 62 - 70
  • [47] A 3D Monte Carlo study of the effect of grain boundary anisotropy and particles on the size distribution of grains after recrystallisation and grain growth
    Fjeldberg, Egil
    Marthinsen, Knut
    COMPUTATIONAL MATERIALS SCIENCE, 2010, 48 (02) : 267 - 281
  • [48] Friction stir welding of 3D printed melt flow compatible dissimilar thermoplastic composites
    Kumar, Ranvijay
    Singh, Rupinder
    Ahuja, I. P. S.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2021, 235 (10) : 1878 - 1890
  • [49] Monte Carlo simulation of recrystallization and grain growth in steels: Preliminary results
    Okuda, K
    Rollett, AD
    RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2, 2001, : 1007 - 1012
  • [50] Implementation of 3D Lattice Monte Carlo Simulation on a Cluster of Symmetric Multiprocessors
    雷咏梅
    蒋英
    冯捷
    Journal of Shanghai University, 2002, (04) : 319 - 324
12345