Experimental study on the shear strength of reinforced concrete beams cast with Lava lightweight aggregates

被引：39

作者：

Nawaz, W. ^{[1
]}

Abdalla, J. A. ^{[1
,2
]}

Hawileh, R. A. ^{[1
,2
]}

Alajmani, H. S. ^{[1
]}

Abuzayed, I. H. ^{[1
]}

Ataya, H. ^{[1
]}

Mohamed, H. A. ^{[1
]}

机构：

[1] Amer Univ Sharjah, Dept Civil Engn, POB 26666, Sharjah, U Arab Emirates

[2] Amer Univ Sharjah, Mat Sci & Engn Res Inst, POB 26666, Sharjah, U Arab Emirates

来源：

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING | 2019年 / 19卷 / 04期

关键词：

Lightweight; Aggregates; Shear strength; Reinforced concrete; Beams; BEHAVIOR; PERFORMANCE; MEMBERS; PUMICE;

D O I：

10.1016/j.acme.2019.05.003

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper investigates experimentally the shear strength behavior of reinforced concrete (RC) beams cast with Lava lightweight aggregates as a replacement of normal coarse aggregates. A total of 24 shear deficient RC beams were fabricated and cast with normal (NWC) and lightweight (LWC) concrete and tested under three-point bending after 28 and 56 days. The variables of the experimental program include type of aggregate, concrete compressive strength, and beam size. The experimental results include load-deflection response curves along with failure mode for each beam specimen. The experimental result showed that all beams failed in a similar fashion, due to diagonal tension shear crack. However, a larger number of cracks with less spacing occurred in the LWC beams as compared to NWC specimens. Based on the experimental results, it can be also concluded that LWC specimens tested after 56 days achieved comparable shear strength results to that of NWC beams. In addition, the strength reduction factor (lambda) for LWC specimens was in the range of 0.69-0.98. The concrete shear strength (V-c) was also predicted using different shear design provisions and the results has shown that Eurocode 2 provisions yielded the lowest C.O.V. of 2.3 and 10.2% for NWC and LWC specimens, respectively. (C) 2019 Politechnika Wroclawska. Published by Elsevier B.V. All rights reserved.

引用

页码：981 / 996

页数：16

共 27 条

[1]

ACI Committee 318, 2005, 318 ACI COMM

[2] Shear behaviour of reinforced palm kernel shell concrete beams [J].

Alengaram, U. Johnson ;

Jumaat, Mohd Z. ;

Mahmud, Hilmi ;

Fayyadh, Moatasem M. .

CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (06) :2918-2927

[3] Bonding of steel reinforcement in structural expanded clay lightweight aggregate concrete: The influence of failure mechanism and concrete composition [J].

Alexandre Bogas, J. ;

Gloria Gomes, M. ;

Real, Sofia .

CONSTRUCTION AND BUILDING MATERIALS, 2014, 65 :350-359

[4] Ultimate shear behaviour of hybrid reinforced concrete beam-to-steel column assemblages [J].

Bompa, D. V. ;

Elghazouli, A. Y. .

ENGINEERING STRUCTURES, 2015, 101 :318-336

[5] Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics [J].

Campana, Stefano ;

Ruiz, Miguel Fernandez ;

Anastasi, Andrea ;

Muttoni, Aurelio .

MAGAZINE OF CONCRETE RESEARCH, 2013, 65 (06) :386-404

[6]

Canadian Standards Association (CSA), 2004, 2004A23304 CANCSA

[7]

Fib, 2012, CEB FIP MOD COD 2010

[8] Performance of reinforced concrete beams cast with different percentages of GGBS replacement to cement [J].

Hawileh, Rami A. ;

Abdalla, Jamal A. ;

Fardmanesh, Fakherdine ;

Shahsana, Poya ;

Khalili, Abdolreza .

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2017, 17 (03) :511-519

[9]

Hsu TTC, 2010, ACI STRUCT J, V107, P340

[10] Shear strength of oil palm shell foamed concrete beams [J].

Jumaat, Mohd Zamin ;

Alengaram, U. Johnson ;

Mahmud, Hilmi .

MATERIALS & DESIGN, 2009, 30 (06) :2227-2236

← 1 2 3 →