Numerical analysis of double track formation for selective laser melting of 316L stainless steel

被引：0
作者：
Xuehui Chen
Weihao Mu
Xin Xu
Wei Liu
Lei Huang
Hao Li
机构：
[1] Anhui Jianzhu University,Key Laboratory of Intelligent Manufacturing of Construction Machinery
来源：
Applied Physics A | 2021年 / 127卷
关键词：
Selective laser melting; Numerical simulation; Double track formation; Defects;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Selective laser melting (SLM) is a popular additive manufacturing technique for metal material. Microstructure and defects of fabricated parts by SLM are closely associated with double scanning track. In this study, the single/double track formation simulation of 316L stainless steel was established to study the influence of process parameters on the forming and the defects during the SLM process. In addition, the impact of melt pool flow on single/double track forming and defects was analyzed. Experiments verified the numerical simulation. Results show that the volume energy density (VED) has significant influence on the formation and defects of SLM, and the optimized volume energy density (VED) range is obtained by numerical simulation and experiments.
引用
收藏
相关论文
共 44 条
  • [1] Herzog D(2016)Additive manufacturing of metals Acta Mater. 117 371-392
  • [2] Lewandowski JJ(2016)Metal additive manufacturing: a review of mechanical properties Annu. Rev. Mater. Res. 46 151-186
  • [3] Seifi M(2015)Review of selective laser melting: materials and applications Appl. Phys. Rev. 2 041101-477
  • [4] Yap CY(2015)A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties Prog. Mater Sci. 74 401-175
  • [5] Olakanmi EO(2018)Main defects observed in aluminum alloy parts produced by SLM: from causes to consequences Addit. Manuf. 22 165-527
  • [6] Cochrane RF(2017)Defect formation mechanisms in selective laser melting: a review Chin. J. Mech. Eng. 30 515-2466
  • [7] Dalgarno KW(2020)A short review on selective laser melting of H13 steel Int. J. Adv. Manuf. Technol. 108 2453-879
  • [8] Galy C(2014)Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting Int. J. Adv. Manuf. Technol. 76 869-263
  • [9] Zhang B(2017)Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel J. Mater. Process. Technol. 249 255-1048
  • [10] Li Y(2019)Influence of processing parameters on internal porosity and types of defects formed in Ti6Al4V lattice structure fabricated by selective laser melting Mater. Sci. Eng.: A 767 138387-974
12345