Optimization of crescent-shaped block downstream a row of cylindrical holes to enhance film cooling effectiveness

被引:0
作者
Pengfei Zhang
Chao Zhang
Zhan Wang
机构
[1] Tianjin University of Technology,Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, School of Mechanical Engineering
[2] Tianjin University of Technology,National Demonstration Center for Experimental Mechanical and Electrical Engineering Education
[3] Shandong University,School of Energy and Power Engineering
来源
Journal of Thermal Analysis and Calorimetry | 2022年 / 147卷
关键词
Gas turbine; Film cooling; Crescent-shaped block; Cooling effectiveness; Optimization;
D O I
暂无
中图分类号
学科分类号
摘要
The present work has been conducted to find the optimial geometrical parameter combination for the crescent-shaped block downstream of a row of cylindrical holes. The effects of geometrical parameters on the cooling performance are evaluated from the results of a parametric study. The maximum area-averaged cooling effectiveness is pursued using the genetic algorithm combined with the CFD method at two blowing ratios of 0.5 and 1.5. Compared with the reference block, the corresponding optimal block demonstrates an increase in area-average cooling effectiveness by 6.2% at a blowing ratio of 0.5 and 98.3% at a blowing ratio of 1.5, respectively. The enhancement in the cooling performance mainly results from the improvement in the streamwise coolant coverage and the lateral coolant coverage at blowing ratios of 0.5 and 1.5, respectively.
引用
收藏
页码:11205 / 11219
页数:14
相关论文
共 50 条
[41]   Effect of blowing ratio on film-cooling effectiveness of ginkgo shaped holes: a numerical approach [J].
Awais, Muhammad ;
Hasan, Reaz ;
Rahman, Hamidur .
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2022, 46 (02) :271-284
[42]   Effects of crossflow-fed-shaped holes on the adiabatic film cooling effectiveness [J].
Qenawy, Mohamed ;
Zhou, Wenwu ;
Liu, Yingzheng .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2022, 177
[43]   Shape optimization of a bended film-cooling hole to enhance cooling effectiveness [J].
Kim, Jun-Hee ;
Kim, Kwang-Yong .
JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, 2019, 14 (01)
[44]   Film Cooling Effectiveness Superposition Calculation of Double-Row Injection Holes on Turbine Vane [J].
Xu Zhipeng ;
Zhu Huiren ;
Liu Cunliang ;
Ye Lin ;
Zhou Daoen .
JOURNAL OF THERMAL SCIENCE, 2022, 31 (06) :2424-2437
[45]   Film Cooling Effectiveness Superposition Calculation of Double-Row Injection Holes on Turbine Vane [J].
Zhipeng Xu ;
Huiren Zhu ;
Cunliang Liu ;
Lin Ye ;
Daoen Zhou .
Journal of Thermal Science, 2022, 31 :2424-2437
[46]   Reynolds stresses and turbulent heat fluxes in fan-shaped and cylindrical film cooling holes [J].
Hao, Muting ;
di Mare, Luca .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2023, 214
[47]   Film cooling effectiveness and heat transfer coefficient distributions around diffusion shaped holes [J].
Yu, Y ;
Yen, CH ;
Shih, TIP ;
Chyu, MK ;
Gogineni, S .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2002, 124 (05) :820-827
[48]   Experimental investigation of the full coverage film cooling effectiveness of a turbine blade with shaped holes [J].
Liu, Cunliang ;
Zhang, Fan ;
Zhang, Shuaiqi ;
Shi, Qingqing ;
Song, Hui .
CHINESE JOURNAL OF AERONAUTICS, 2022, 35 (03) :297-308
[49]   Experimental and numerical study on the effects of shaped multi-holes on the effectiveness of film cooling [J].
Yaser Taheri ;
Mehran Rajabi Zargarabadi ;
Mehdi Jahromi .
Journal of Thermal Analysis and Calorimetry, 2021, 146 :1723-1733
[50]   In-Hole Measurements of Flow Inside Fan-Shaped Film Cooling Holes and Downstream Effects [J].
Issakhanian, Emin .
INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER, 2024, 9 (04)