Optimization of crescent-shaped block downstream a row of cylindrical holes to enhance film cooling effectiveness

被引：0
作者：
Pengfei Zhang
Chao Zhang
Zhan Wang
机构：
[1] Tianjin University of Technology,Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, School of Mechanical Engineering
[2] Tianjin University of Technology,National Demonstration Center for Experimental Mechanical and Electrical Engineering Education
[3] Shandong University,School of Energy and Power Engineering
来源：
Journal of Thermal Analysis and Calorimetry | 2022年 / 147卷
关键词：
Gas turbine; Film cooling; Crescent-shaped block; Cooling effectiveness; Optimization;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present work has been conducted to find the optimial geometrical parameter combination for the crescent-shaped block downstream of a row of cylindrical holes. The effects of geometrical parameters on the cooling performance are evaluated from the results of a parametric study. The maximum area-averaged cooling effectiveness is pursued using the genetic algorithm combined with the CFD method at two blowing ratios of 0.5 and 1.5. Compared with the reference block, the corresponding optimal block demonstrates an increase in area-average cooling effectiveness by 6.2% at a blowing ratio of 0.5 and 98.3% at a blowing ratio of 1.5, respectively. The enhancement in the cooling performance mainly results from the improvement in the streamwise coolant coverage and the lateral coolant coverage at blowing ratios of 0.5 and 1.5, respectively.
引用
收藏
页码：11205 / 11219
页数：14
相关论文
共 50 条
[31]   Influence on film cooling effectiveness of novel holes based on cylindrical configurations [J].
Zhu, Rui ;
Simon, Terrence W. ;
Xie, Gongnan .
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2019, 75 (07) :469-488
[32]   SENSITIVITY ANALYSIS OF FLOW CONDITIONS AND GEOMETRIC PARAMETERS ON THE FILM COOLING EFFECTIVENESS FOR A FLAT TEST PLATE, PART 1: SINGLE ROW OF CYLINDRICAL HOLES FILM COOLING [J].
Nguyen, Cuong ;
Rodriguez, Sylvette ;
Zuniga, Humberto ;
Ho, Son ;
Kapat, Jayanta .
HT2009: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE 2009, VOL 2, 2009, :529-538
[33]   Experimental and numerical study on the effects of shaped multi-holes on the effectiveness of film cooling [J].
Taheri, Yaser ;
Zargarabadi, Mehran Rajabi ;
Jahromi, Mehdi .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2021, 146 (04) :1723-1733
[34]   Effect of main flow orientation angle on cooling characteristics of single row of cylindrical film cooling holes [J].
20151000594407 .
2015, Beijing University of Aeronautics and Astronautics (BUAA) (30) :59-66
[35]   NUMERICAL INVESTIGATION ON FILM-COOLING CHARACTERISTICS FROM A ROW OF HOLES WITH RIDGE-SHAPED TABS [J].
Shan, Yong ;
Zhang, Jing-Zhou .
JOURNAL OF ENHANCED HEAT TRANSFER, 2013, 20 (03) :251-265
[36]   Enhanced film cooling performance of a row of cylindrical holes embedded in the saw tooth slot [J].
Li, Guang-chao ;
Yang, Peng ;
Zhang, Wei ;
Wu, Zhuang ;
Kou, Zhi-hai .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 132 :1137-1151
[37]   Investigation of Film Cooling and Superposition Method for Double Row Dustpan-Shaped Holes [J].
Zhu Huiren ;
Guo Tao ;
Xu Duchun .
HEAT TRANSFER-ASIAN RESEARCH, 2008, 37 (04) :208-217
[38]   Effect of rotation on film cooling with a single row of shaped holes on blade pressure side [J].
Zhu, Xingdan ;
Zhang, Jingzhou ;
Tan, Xiaoming ;
Shan, Yong .
JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, 2017, 12 (02)
[39]   Film Cooling Effectiveness on a Convex and Flat Surface in Conditions of Pulsed Blowing through Fan-Shaped and Cylindrical Holes [J].
Il’inkov, A.V. ;
Shchukin, A.V. ;
Takmovtsev, V.V. ;
Starodumov, A.V. .
Russian Aeronautics, 2024, 67 (03) :610-617
[40]   OPTIMIZATION OF FAN-SHAPED FILM COOLING HOLES FOR ENHANCING COOLING EFFECTIVENESS UNDER VARIABLE COOLANT INLET PRESSURE RATIOS [J].
Liu, Zhansheng ;
Yang, Kefeng ;
Yang, Xing ;
Liu, Zhao ;
Feng, Zhenping .
PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 7B, PT II, 2020,
12345