Optimization of crescent-shaped block downstream a row of cylindrical holes to enhance film cooling effectiveness

被引：0
|
作者：
Pengfei Zhang
Chao Zhang
Zhan Wang
机构：
[1] Tianjin University of Technology,Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, School of Mechanical Engineering
[2] Tianjin University of Technology,National Demonstration Center for Experimental Mechanical and Electrical Engineering Education
[3] Shandong University,School of Energy and Power Engineering
来源：
Journal of Thermal Analysis and Calorimetry | 2022年 / 147卷
关键词：
Gas turbine; Film cooling; Crescent-shaped block; Cooling effectiveness; Optimization;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present work has been conducted to find the optimial geometrical parameter combination for the crescent-shaped block downstream of a row of cylindrical holes. The effects of geometrical parameters on the cooling performance are evaluated from the results of a parametric study. The maximum area-averaged cooling effectiveness is pursued using the genetic algorithm combined with the CFD method at two blowing ratios of 0.5 and 1.5. Compared with the reference block, the corresponding optimal block demonstrates an increase in area-average cooling effectiveness by 6.2% at a blowing ratio of 0.5 and 98.3% at a blowing ratio of 1.5, respectively. The enhancement in the cooling performance mainly results from the improvement in the streamwise coolant coverage and the lateral coolant coverage at blowing ratios of 0.5 and 1.5, respectively.
引用
收藏
页码：11205 / 11219
页数：14
相关论文
共 50 条
  • [1] Optimization of crescent-shaped block downstream a row of cylindrical holes to enhance film cooling effectiveness
    Zhang, Pengfei
    Zhang, Chao
    Wang, Zhan
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2022, 147 (20) : 11205 - 11219
  • [2] Film Cooling of Cylindrical Hole With a Downstream Short Crescent-Shaped Block
    An, Baitao
    Liu, Jianjun
    Zhang, Chao
    Zhou, Sijing
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2013, 135 (03):
  • [3] Film Cooling for a Cylindrical Hole with Downstream Crescent-Shaped Block with Perpendicular Crossflow
    C. Zhang
    P. F. Zhang
    P. F. Ju
    Journal of Engineering Physics and Thermophysics, 2022, 95 : 599 - 607
  • [4] FILM COOLING FOR A CYLINDRICAL HOLE WITH DOWNSTREAM CRESCENT-SHAPED BLOCK WITH PERPENDICULAR CROSSFLOW
    Zhang, C.
    Zhang, P. F.
    Ju, P. F.
    JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS, 2022, 95 (03) : 599 - 607
  • [5] Cooling Performance for Cylindrical Film-Cooling Hole with Divided Downstream Crescent-Shaped Block
    Zhang, Pengfei
    Tong, Zhiting
    Wang, Fei
    Bai, Linchao
    Zhang, Chao
    2019 5TH INTERNATIONAL CONFERENCE ON ENERGY EQUIPMENT SCIENCE AND ENGINEERING, 2020, 461
  • [6] Optimisation of crescent-shaped block upstream of the cylindrical hole to enhance film cooling effectiveness using CFD method and genetic algorithm
    Zhang, Pengfei
    Zhang, Chao
    Wang, Zhan
    PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 2023, 23 (02): : 111 - 121
  • [7] Film Cooling Performance of a Cylindrical Hole with an Upstream Crescent-Shaped Block in Linear Cascade
    Zhang, Chao
    Dong, Junhuai
    Wang, Zhan
    Zhang, Pengfei
    Tong, Zhiting
    Zhang, Yue
    MACHINES, 2023, 11 (01)
  • [8] EFFECT OF THE DOWNSTREAM CRESCENT-SHAPED BLOCK HEIGHT ON THE FLAT-PLATE FILM FLOW AND COOLING PERFORMANCE
    Zhang, C.
    Wang, Z.
    JOURNAL OF APPLIED MECHANICS AND TECHNICAL PHYSICS, 2018, 59 (05) : 951 - 961
  • [9] Effect of the Downstream Crescent-Shaped Block Height on the Flat-Plate Film Flow and Cooling Performance
    C. Zhang
    Z. Wang
    Journal of Applied Mechanics and Technical Physics, 2018, 59 : 951 - 961
  • [10] Numerical study on film cooling effectiveness from shaped and crescent holes
    Dai, Ping
    Lin, Feng
    HEAT AND MASS TRANSFER, 2011, 47 (02) : 147 - 154
12345