Chatter stability prediction of ball-end milling considering multi-mode regenerations

被引：0
作者：
Jie Zhang
Chengying Liu
机构：
[1] Tsinghua University,Institute of Manufacturing Engineering, Department of Mechanical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2019年 / 100卷
关键词：
Chatter; Stability; Ball-end milling; Multi-mode regenerations;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ball-end milling has been commonly used in the manufacturing of complex surfaces and structures. In order to improve the machining efficiency and ensure the manufacturing quality, chatter has to be avoided. The stability of cylindrical end mills has been well studied by selecting the most flexible dominant mode. This paper models the chatter stability of ball-end milling cutter with multiple modes and solves it in discrete time domain. Firstly, the multiple degree-of freedom (DOF) vibration model of the tool-workpiece system is established in modal coordinates to decouple the delay differential equations (DDEs). Then, to complete the motion equations of ball-end milling cutter, the cutting force model considering regenerative effect is built by evaluating the dynamic thickness at each cutting point along the cutting edge. Finally, the stability lobe diagram (SLD) of ball-end milling is solved by full-discretization method in discrete time domain. The cutting tests carried out on a machining center verify the prediction accuracy and observe chatter phenomenon caused by different dominant modes.
引用
收藏
页码：131 / 142
页数：11
相关论文
共 124 条
[11]  
Mann BP(2017)High-order full-discretization method using Lagrange interpolation for stability analysis of turning processes with stiffness variation J Sound Vib 386 50-64
[12]  
Patel BR(2018)An updated full-discretization milling stability prediction method based on the higher-order Hermite-Newton interpolation polynomial Int J Adv Manuf Technol 95 2227-2242
[13]  
Insperger T(2017)Third-order updated full-discretization method for milling stability prediction Int J Adv Manuf Technol 92 2299-2309
[14]  
Stépán G(2017)Milling stability prediction with multiple delays via the extended Adams-Moulton-based method Math Probl Eng 2017 1-15
[15]  
Insperger T(2011)Numerical integration method for prediction of milling stability J Manuf Sci Eng Trans ASME 133 044502-044501
[16]  
Stepan G(2013)Stability analysis of milling via the differential quadrature method J Manuf Sci Eng Trans ASME 135 43-47
[17]  
Ding Y(2015)A novel approach for the prediction of the milling stability based on the Simpson method Int J Mach Tools Manuf 99 446-453
[18]  
Zhu LM(2005)Simultaneous stability and surface location error predictions in milling J Manuf Sci Eng Trans ASME 127 2585-2591
[19]  
Zhang XJ(2009)Prediction of chatter stability in high-speed finishing end milling considering multi-mode dynamics J Mater Process Technol 209 98-102
[20]  
Ding H(2012)A novel design method of irregular pitch cutters to attain simultaneous suppression of multi-mode regenerations Procedia CIRP 4 589-603
12345678910