An integrated GIS-based approach for geohazards risk assessment in coal mines

From the viewpoint of safety in underground coal mining, the most suitable mining panel is the one with minimum geological structures, the right machinery, and equipment selection, trained employee, and proficient stope management. Since the ground parameters are uncontrollable and inherent uncertainties exist, a high percent of risk will usually accompany the underground coal mining activities. The main purpose of this study is to present a geological–geotechnical risk assessment model for identification of high risk-prone areas in underground coal mines using an integrated GIS-geostatistics system. Tabas as the first mechanized and largest underground coal mine in Iran was selected as a case study in this study. Gas content of coal seam, Coal Mine Roof Rating (CMRR), initial in situ stress state, fault throw, and orientation were selected as hazard/risk factors. For estimating the amount of coal seam gas content, CMRR and initial in situ stress in unsampled areas and providing the prediction maps, geostatistics module in ArcGIS was used. Rock engineering system–interaction matrix method was used for attribute weight assignment. Next, the attribute layers were weighted, rated, and overlaid to create a final map of geohazards risk. The analysis results of final risk map indicate that about 45% of under study area is prone to high to very high geohazards risk. Comparison of the results with experiences obtained during the early part of the mine and mined-out panels showed generally good agreement with promising ideas. This highlights the potential application of the GIS-based approach for hazards detection and geohazards risk assessment in underground coal mines.