Application of substructural damage identification using adaptive Kalman filter

被引:7
作者
Xing S. [1 ]
Halling M.W. [2 ]
Pan S. [3 ]
机构
[1] Subsea Engineering, McDermott Inc, Houston, TX
[2] Department of Civil and Environmental Engineering, Utah State University, Logan, UT
[3] Zhejiang University City College, Hangzhou
关键词
Applications; Damage identification; Kalman filter; Substructure;
D O I
10.1007/s13349-013-0054-3
中图分类号
学科分类号
摘要
Substructure identification is a method to address the numerical difficulty and insufficient sensors involved in structural identification of a large system. This method divides a large structure into certain number of small substructures and identifies them separately. In substructure identification, various structural identification algorithms have been used for identifying constant structural parameters. This paper used adaptive Kalman filter to identify varying properties of substructures. Numerical studies were performed on a shear building, a plane frame, and a plane truss bridge to investigate the effectiveness of the adaptive Kalman filter in substructure identification. The results demonstrated that the stiffness and damping of substructures can be identified successfully from the limited acceleration responses, and abrupt changes of the properties can be tracked well. The studies in this paper are useful for structural health monitoring and structural model updating. © 2013 Springer-Verlag Berlin Heidelberg.
引用
收藏
页码:27 / 42
页数:15
相关论文
共 30 条
[1]  
Tee K.F., Koh C.G., Quek S.T., Numerical and experimental studies of a substructural identification strategy, Struct Health Monit, 8, pp. 397-410, (2009)
[2]  
Koh C.G., Shankar K., Substructural identification method without interface measurement, J Eng Mech, 129, pp. 769-776, (2003)
[3]  
Koh C.G., Hong B., Liaw C.Y., Substructural and progressive structural identification methods, Eng Struct, 25, pp. 1551-1563, (2003)
[4]  
Yun C.B., Lee H.J., Substructural identification for damage estimation of structures, Struct Saf, 19, pp. 121-140, (1997)
[5]  
Koh C.G., See L.M., Balendra T., Estimation of structural parameters in time domain-a substructure approach, Earthq Eng Struct Dyn, 20, pp. 787-801, (1991)
[6]  
Sandesh S., Shankar K., Time domain identification of structural parameters and input time history using a substructural approach, Int J Struct Stab Dyn, 9, pp. 243-265, (2009)
[7]  
Gontier C., Bensaibi M., Time-domain identification of a substructure from in-situ analysis of the whole structure, Mech Syst Signal Process, 9, pp. 379-396, (1995)
[8]  
Liu P.L., Chian C.C., Parametric identification of truss structures using static strains, J Struct Eng ASCE, 123, pp. 927-933, (1997)
[9]  
Oreta A., Tanabe T., Element identification of member properties of framed structures, ASCE J Struct Eng, 120, pp. 1961-1975, (1994)
[10]  
Park N.G., Park Y.S., Identification of damage on a substructure with measured frequency response functions, J Mech Sci Technol, 19, pp. 1891-1901, (2005)