Stress Corrosion Cracking of Stainless Steel Refractory Anchors Prior to Service

被引：3

作者：

Etienne J. ^{[1
]}

Metcalfe R.G. ^{[2
]}

机构：

[1] Engineering and Materials Science Group, Bureau Veritas–Asset Integrity and Reliability Services, Unit 6, 175-177 Five Islands Road, Unanderra, 2526, NSW

[2] Engineering and Materials Science Group, Bureau Veritas–Asset Integrity and Reliability Services, 29 Rosegum Close, Warabrook, 2304, NSW

来源：

Journal of Failure Analysis and Prevention | 2018年 / 18卷 / 1期

关键词：

Austenitic stainless steel; Chlorides; Hydrochloric acid; PVC electrical tape; Refractory anchors; Stress corrosion cracking;

D O I：

10.1007/s11668-017-0379-z

中图分类号：

学科分类号：

摘要：

This paper presents the results of an examination of cracking discovered in stainless steel anchors in a refractory block destined for inclusion in an ignition hood. Cracking was found to be a result of stress corrosion cracking due to exposure to chlorides from the breakdown of PVC electrical tape in which the anchors had been wrapped to form an expansion coating during the curing of the refractory material into which the anchors were inserted. © 2017, ASM International.

引用

页码：8 / 12

页数：4

共 12 条

[1]

Parrott R., Pitts H., Chloride Stress Corrosion Cracking in Austenitic Stainless Steel: Assessing Susceptibility and Structural Integrity, (2011)

[2]

Combrade P., Stress corrosion cracking and corrosion fatigue, Stainless Steel, pp. 331-402, (1993)

[3]

Muraleedharan P., Metallurgical influences on stress corrosion cracking, Corrosion of Austenitic Stainless Steels: Mechanism, Mitigation and Monitoring, pp. 139-165, (2002)

[4]

Deflorian F., Dalvit M., Rossi S., Zanella C., Fedel M., Stress corrosion cracking (SCC) failure in marine areas of fixed guards for climbing, Corros. Eng. Sci. Technol., 50, 6, pp. 462-466, (2015)

[5]

Ghosh S., Kain V., Effect of surface machining and cold working on the ambient temperature chloride stress corrosion cracking susceptibility of AISI 304L stainless steel, Mater. Sci. Eng. A, 527, 3, pp. 679-683, (2010)

[6]

Prosek T., Iversen A., Taxen C., Thierry D., Low-temperature stress corrosion cracking of stainless steels in the atmosphere in the presence of chloride deposits, Corrosion, 65, 2, pp. 105-117, (2009)

[7]

Tavares S.S.M., Silva V.G., Pardal J.M., Corte J.S., Investigation of stress corrosion cracks in a UNS S32750 superduplex stainless steel, Eng. Fail. Anal., 35, pp. 88-94, (2013)

[8]

Fang Z., Wu Y., Zhu R., Cao B., Xiao F., Stress corrosion cracking of austenitic type 304 stainless steel in solutions of hydrochloric acid + sodium chloride at ambient temperature, Corros. Sci., 50, 11, pp. 873-878, (1994)

[9]

Brower M., Chlorides in urea plants-stainless steel world, (2009)

[10]

O’Brien Corporation, Chloride stress corrosion, (2014)

← 1 2 →