Effect of the microstructure on the mechanical properties of a directionally solidified Y3Al5O12/Al2O3 eutectic fiber

被引：0
作者：
D.-Y. Park
J.-M. Yang
机构：
[1] University of California,Department of Materials Science and Engineering
来源：
Journal of Materials Science | 2001年 / 36卷
关键词：
Microstructure; Scanning Electron Microscopy; Heat Treatment; Tensile Strength; Fracture Toughness;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The strength and fracture behaviors of a directionally solidified Y3Al5O12/Al2O3 eutectic fiber were investigated. The fiber was grown continuously by an edge-defined film-fed growth (EFG) technique. The microstructure was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The room temperature tensile strength and Weibull's modulus of the eutectic fiber before and after heat treatment at 1460°C were measured. The fracture toughness and crack propagation behaviors were investigated using an indentation technique. Significant coarsening of the lamellar microstructure was observed after heat treatment at 1460°C in air. The degradation of the room temperature tensile strength in the Y3Al5O12/Al2O3 eutectic fiber after heat treatment was attributed to the development of surface grooves at the surface of the fiber. Also, the Y3Al5O12/Al2O3 eutectic fiber showed a radial (Palmqvist) crack type and exhibited an anisotropic crack propagation behavior during the indentation tests.
引用
收藏
页码：5593 / 5601
页数：8
相关论文
共 50 条
[21]   Rapid solidification behaviour of Al2O3/Y3Al5O12 (YAG) binary eutectic ceramic in situ composites [J].
Su, Haijun ;
Zhang, Jun ;
Cui, Chunjuan ;
Liu, Lin ;
Fu, Hengzhi .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 479 (1-2) :380-388
[22]   Microstructure and Mechanical Properties of Al2O3/Er3Al5O12 Binary Eutectic Ceramic Prepared by Bridgman Method [J].
Song, Caiyu ;
Wang, Shunheng ;
Liu, Juncheng ;
Zhai, Shuoyan .
MATERIALS, 2018, 11 (04)
[23]   Microstructure and mechanical properties of directionally solidified Al2O3/GdAlO3 eutectic ceramic prepared with horizontal high-frequency zone melting [J].
Wang, Shunheng ;
Chu, Zongfu ;
Liu, Juncheng .
CERAMICS INTERNATIONAL, 2019, 45 (08) :10279-10285
[24]   Regulation of Y2O3 addition on structure and properties of Al2O3/ZrO2(Y2O3) directionally solidified eutectic ceramic [J].
Zhai, Shuoyan ;
Pan, Wei ;
Liu, Juncheng .
CERAMICS INTERNATIONAL, 2023, 49 (18) :30240-30247
[25]   Effects of Growth Rate on Microstructure and Properties of Directionally Solidified Eutectic Ceramic Al2O3/MgAl2O4/ZrO2 [J].
Chu, Z. ;
Wang, S. ;
Liu, J. ;
Wang, J. .
JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY, 2018, 9 (01) :61-68
[26]   Microstructural stability and high temperature strength of directionally solidified Al2O3/Er3Al5O12/ZrO2 eutectic ceramics [J].
Wang, Shunheng ;
Liu, Juncheng ;
Lan, Dehui ;
Gao, Rui ;
Torre, Jose Ignacio Pena .
CERAMICS INTERNATIONAL, 2024, 50 (01) :306-314
[27]   Microstructure and mechanical properties of Al2O3/Er3Al5O12 eutectic rods grown by the laser-heated floating zone method [J].
Mesa, M. C. ;
Oliete, P. B. ;
Orera, V. M. ;
Pastor, J. Y. ;
Martin, A. ;
LLorca, J. .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (07) :1241-1250
[28]   Directionally solidified fabrication in planar geometry of Al2O3-Er3Al5O12 eutectic composite for thermophotovoltaic devices [J].
Sola, D. ;
Oliete, P. B. ;
Pena, J. I. .
OPTICS EXPRESS, 2016, 24 (10) :A823-A831
[29]   Directionally solidified Al2O3-Yb3Al5O12 eutectics for selective emitters [J].
Oliete, P. B. ;
Mesa, M. C. ;
Merino, R. I. ;
Orera, V. M. .
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2016, 144 :405-410
[30]   Changes in the microstructure and mechanical properties of Al2O3/YSZ directionally solidified eutectic ceramics during long-time heat treatment [J].
Zhai, Shuoyan ;
Liu, Juncheng ;
Liu, Qiang .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2021, 41 (16) :266-273
12345