Effect of Electrode Material on the Electrical Properties of Tin Dioxide Thick Films

被引:0
作者
A. G. Gonchar
B. M. Rud’
N. I. Siman
E. Ya. Tel’nikov
A. A. Rogozinskaya
L. I. Fiyalka
A. K. Marchuk
机构
[1] National Academy of Sciences of Ukraine,Frantsevich Institute for Problems of Materials Science
来源
Powder Metallurgy and Metal Ceramics | 2015年 / 54卷
关键词
D O I
暂无
中图分类号
学科分类号
摘要
The influence of electrode materials made of Ag-containing paste and Ni3B-based paste on the properties of fine SnO2 thick films is studied. The Sn0.97Sb0.03O2 nanopowder is introduced into the thick-film composite to intensify film consolidation during heat treatment, enhance film adhesion to the substrate, and control the resistivity. X-ray diffraction and electron microscopy are applied. The dependences of film resistivity on composition of the conducting phase are established. The effect of heat treatment temperature on the resistivity and current-voltage characteristics of films on silver and nickel electrodes is examined. It is shown that the electrodes made of powdered Ni3B paste can be used for SnO2 films whose heat treatment temperature does not exceed 1073 K, in particular, for gas sensors.
引用
收藏
页码:204 / 209
页数:5
相关论文
共 31 条
[1]  
Fan J(2010)Characterization of SnO J. Eur. Ceram. Soc. 30 545-548
[2]  
Zhao H(2013)–CoO–MnO–Nb Sensors 13 3889-3901
[3]  
Xi Y(2007)O Sens. Actuators B 123 318-324
[4]  
Lee SC(2004) ceramics J. Eur. Ceram. Soc. 24 1049-1052
[5]  
Kim SY(2012)“Improvement of H2S sensing properties of SnO2-based thick film gas sensors promoted with MoO3 and NiO” Powder Metall. Met. Ceram. 51 191-197
[6]  
Hwang BW(1998)The selective detection of C Powder Metall. Met. Ceram. 37 438-442
[7]  
Kim K-W(2012)H Procedia Eng. 47 514-517
[8]  
Cho P-S(2006)OH using SnO Talanta 68 1732-1735
[9]  
Kim S-J(2003)–ZnO thin film gas sensors prepared by combinatorial solution deposition Thin Solid Films 436 137-140
[10]  
Fan J(1992)Semiconducting densified SnO Izv. Akad. Nauk SSSR. Ser. Neorg. Mater. 28 1116-1118