Effect of in-situ heat treatment and process parameters on the laser-deposited IN718 microstructure and mechanical properties

被引：1
作者：
B. N. Masina
S. Skhosane
S. Hoosain
M. Tlotleng
机构：
[1] Council for Scientific and Industrial Research,Faculty of Engineering and Built Environment
[2] National Laser Centre,undefined
[3] University of Johannesburg,undefined
来源：
MRS Advances | 2020年 / 5卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The direct laser-deposited Inconel 718 (IN718) specimens were produced using 1073 nm, high power continuous wave (CW), IPG Ytterbium fibre laser and in-situ heat treatment. The laser power and in-situ heat treatment temperature were fixed while varying the laser scanning speed from 0.83 to 2.50 cm/s. The microstructure and micro-hardness of the IN718 specimens were characterized using an optical microscope (OM), scanning electron microscopy (SEM) equipped with an energy-dispersive X-ray spectroscopy (EDS or EDX) and Vickers system. The microstructure of the specimens consists of /-matrix as the primary phase, Nb-rich particles, constitutional liquation cave, liquation cracking and ductility-dip cracks. It was found that the micro-hardness profile of the IN718 specimens was gradually increased with the increase of the distance from the surface.
引用
收藏
页码：1245 / 1257
页数：12
相关论文
共 122 条
  • [1] Lambarri J(2013)Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components Opt. Laser Eng. 51 813-821
  • [2] Leunda J(2012)The microstructure and mechanical properties of deposited-IN718 by selective laser melting J. Alloys Compd. 513 518-523
  • [3] Garcia Navas V(2015)Electron microscopy study of direct laser deposition IN718 Mater. Charact. 106 324-337
  • [4] Soriano C(2013)Microstructural changes in a laser forming Inconel 718 superalloy thin wall in the deposition direction J. Optics and Laser Techn. 45 330-335
  • [5] Sanz C(2013)Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components J. Optics and Lasers in Eng. 51 813-821
  • [6] Wang Z(2016)Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718 Mater. Des. 90 586-594
  • [7] Guan K(2005)The effect of cooling rate on the solidification on Inconel 718, Metall. Mater Trans 36 85-96
  • [8] Gao M(2018)The effect of post-processes on the microstructure and creep properties of alloy718 built up by selective laser melting Mater. 11 996-1–996-13
  • [9] Li X(2016)Investigation of dendritic growth and liquation cracking in laser melting deposited Inconel 718 at different laser input angles Mater. Des. 105 133-141
  • [10] Chen X(2009)Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured Inconel 718 Metall. Mater. Trans. A 40 2410-2422
12345678910