Synthesis of planar inductors in low temperature co-fired ceramic technology

被引：0

作者：

Javier Sieiro

Tomás Carrasco Carrillo

Saiyd Ahyoune

Neus Vidal

José María López-Villegas

Joan Aitor Osorio

机构：

[1] Universitat de Barcelona,

来源：

Analog Integrated Circuits and Signal Processing | 2014年 / 78卷

关键词：

Inductor; LTCC; Passive component; PEEC; Automated synthesis;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A simple bisection algorithm for the synthesis of planar inductors using a fast electromagnetic analysis algorithm is presented in this work. Both bisection and electromagnetic analysis algorithms are based on a set of heuristic and physical rules obtained from the study of the electromagnetic behavior of these planar devices. With this procedure, the benefits are two fold: (i) the number of iterations is kept moderately low in the synthesis loop, and (ii) the analysis at each iteration step is speed up without compromising accuracy. The algorithm is applied to the development of an inductor library for a low temperature co-fired ceramic process technology.

引用

页码：77 / 86

页数：9

共 50 条

[21] Microstructure and Phase Development of Buried Resistors in Low Temperature Co-fired Ceramic [J].

Mark A. Rodriguez ;

Pin Yang ;

Paul Kotula ;

Duane Dimos .

Journal of Electroceramics, 2000, 5 :217-223

[22] Piezoelectric active mirror suspension embedded into Low Temperature Co-fired Ceramic [J].

Sobocinski, Maciej ;

Leinonen, Mikko ;

Juuti, Jari ;

Jantunen, Heli .

2011 INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS (ISAF/PFM) AND 2011 INTERNATIONAL SYMPOSIUM ON PIEZORESPONSE FORCE MICROSCOPY AND NANOSCALE PHENOMENA IN POLAR MATERIALS, 2011,

[23] Study on the polishing mechanism of low temperature co-fired ceramic for microsystem application [J].

Zhu, Jijun ;

Yuan, Julong ;

Ang, Simon S. .

ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 2008, 375-376 :47-+

[24] MEASUREMENT OF COMPLEX PERMITTIVITY OF LOW TEMPERATURE CO-FIRED CERAMIC AT CRYOGENIC TEMPERATURES [J].

Jacob, Mohan V. ;

Mazierska, Janina ;

Bialkowski, Marek .

ADVANCES IN ELECTRONIC CERAMIC MATERIALS, 2005, 26 (05) :209-216

[25] MICROSTRUCTURE AND STRENGTH OF LOW TEMPERATURE CO-FIRED CERAMIC SUBSTRATES WITH CHANNELS AND CAVITIES [J].

Zhang, Yang-Fei ;

Miao, Min ;

Jin, Yu-Feng ;

Bai, Shu-Lin .

MICRONANO2008-2ND INTERNATIONAL CONFERENCE ON INTEGRATION AND COMMERCIALIZATION OF MICRO AND NANOSYSTEMS, PROCEEDINGS, 2008, :243-248

[26] Low temperature co-fired ceramic vaporizing liquid microthruster for microspacecraft applications [J].

Karthikeyan, K. ;

Chou, S. K. ;

Khoong, L. E. ;

Tan, Y. M. ;

Lu, C. W. ;

Yang, W. M. .

APPLIED ENERGY, 2012, 97 :577-583

[27] A low temperature co-fired ceramic solid propellant microthruster for micropropulsion applications [J].

Zhang, KL ;

Chou, SK ;

Ang, SS .

Transducers '05, Digest of Technical Papers, Vols 1 and 2, 2005, :672-675

[28] Sintering behavior and biocompatibility of a low temperature co-fired ceramic for microfluidic biosensors [J].

Luo, Jin ;

Eitel, Richard .

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2017, 14 (02) :99-107

[29] Microstructure and phase development of buried resistors in low temperature Co-fired ceramic [J].

Rodriguez, MA ;

Yang, P ;

Kotula, P ;

Dimos, D .

JOURNAL OF ELECTROCERAMICS, 2000, 5 (03) :217-223

[30] Microfabrication of a Novel Ceramic Pressure Sensor with High Sensitivity Based on Low-Temperature Co-Fired Ceramic (LTCC) Technology [J].

Li, Chen ;

Tan, Qiulin ;

Zhang, Wendong ;

Xue, Chenyang ;

Li, Yunzhi ;

Xiong, Jijun .

MICROMACHINES, 2014, 5 (02) :396-407

← 1 2 3 4 5 →