Seawater effect on pin-loaded laminated composites with two parallel holes

被引：0
作者：
Gurbet Örçen
Mustafa Gür
Mustafa Özen
机构：
[1] Dicle University,Department of Mechanical Engineering
[2] Fırat University,Department of Mechanical Engineering
[3] Dokuz Eylül University,Department of Mechanical Engineering
来源：
Journal of Mechanical Science and Technology | 2012年 / 26卷
关键词：
Prepreg; Environmental degradation; Finite element analysis; Mechanical testing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The aim of this study was to investigate the effects of seawater on the failure mode, first failure load and bearing strength behaviour of the pinned joint of fibreglass-reinforced woven epoxy composite prepregs. The specimens were kept in seawater for 3- and 6-month periods. After each period, their mechanical properties were examined. The edge distance-to-upper hole diameter (E/D), the two hole-tohole centre diameter (K/D), the distance from the upper or the lower edge of the specimen to the centre of the hole-to-hole diameter (M/D), and the width of the specimen-to-hole diameter (W/D) ratios were selected as parameters. Moreover, the finite element models of the specimens were developed using ANSYS software, and the Tsai-Wu criterion was used to obtain the first failure load. The numerical and experimental results were compared and were found to be in good agreement for the first failure load.
引用
收藏
页码：4055 / 4063
页数：8
相关论文
共 80 条
[1]  
Karakuzu R.(2008)Effects of geometric parameters on failure behaviour in laminated composite plates with two parallel pin-loaded holes Composite Structures 85 1-9
[2]  
Taylak N.(1982)Strength of mechanically fastened composite joints Journal of Composite Materials 16 470-494
[3]  
İçten B. M.(1984)Failure strength of nonlinearly elastic composite laminates containing a pin loaded hole Journal of Composite Materials 18 464-477
[4]  
Aktaş M.(1998)The bearing strength of EGlass/ Vinyl-Ester composites fabricated by VARTM Composites Science and Technology 58 1519-1529
[5]  
Chang F. K.(1999)Failure analysis of twodimensional carbon-epoxy composite plate pinned joint Mechanics of Composite Materials and Structures 6 347-361
[6]  
Scott R. A.(1999)A progressive damage model for mechanically fastened joints in composite laminates Journal of Composite Materials 33 2248-2280
[7]  
Springer G. S.(2000)Stress and failure analysis of mechanically fastened joints in composite laminates Composite Structures 50 287-296
[8]  
Chang F. K.(2001)A study of the effects of various geometric parameters on the failure strength of pin-loaded woven glass-fiber reinforced epoxy laminate Composites Science and Technology 61 1491-1497
[9]  
Scott R. A.(2003)The strength of pinned joints in laminated composites Composites Science and Technology 63 893-905
[10]  
Springer G. S.(2002)Progressive failure analysis of pin-loaded carbon-epoxy woven composite plates Composites Science and Technology 62 1259-1271
12345678