Residual Stress Analysis on Thin Metal Sheets Using the Incremental Hole Drilling Method – Fundamentals and Validation

被引：0
作者：
A. Magnier
W. Zinn
T. Niendorf
B. Scholtes
机构：
[1] University of Kassel,Institute of Materials Engineering – Metallic Materials
来源：
Experimental Techniques | 2019年 / 43卷
关键词：
Hole drilling; Metal sheet; Thin; Brazing; Residual stress;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The aim of the present work is to broaden the scope of application of the hole drilling method and to enable reliable residual stress measurements on thin metal sheets. In this context the focus is on characterization of residual stresses on brazed sheet metal constructions. In this specific case coarse grains and low sheet thickness are strong restrictions for standard residual stress measurement methods. However, in the current work it is shown that it is possible to extend the scope of application of the incremental hole drilling method to thin components. For this purpose, calibration coefficient matrices for sheets having thicknesses of 0.7 mm, 1 mm and 1.6 mm have been calculated using finite element analysis. Furthermore, by measuring residual stresses of bent metal sheets, the determined coefficients and measurement procedure feasibility have been validated. Finally, the application of the incremental hole drilling method on an austenitic-ferritic brazed sheet metal construction is demonstrated.
引用
收藏
页码：65 / 79
页数：14
相关论文
共 15 条
  • [1] Niehuesbernd J(2014)Influence of gradients in the elastic anisotropy on the reliability of residual stresses determined by the hole drilling method Adv Mater Res 996 289-294
  • [2] Bruder E(2016)Incremental hole drilling for residual stress analysis of strongly textured material states-a new calibration approach Exp Mech 56 369-380
  • [3] Müller C(2011)Residual stress analysis using the hole-drilling method and geometry-specific calibration functions Mater Sci Forum 681 159-164
  • [4] Schuster S(2016)Local residual stress analysis on deep drawn cups by means of the incremental hole-drilling method. Residual stresses 2016: ICRS-10 Mater Res Proc 2 187-192
  • [5] Gibmeier J(1993)Use of displacement data to calculate strain gauge response in non-uniform strain fields Strain 29 9-13
  • [6] Sobolevski EG(1994)Residual-stress determination by single-axis holographic interferometry and hole drilling – part 1: theory Exp Mech 35 66-78
  • [7] Nau A(1982)Brief investigation of induced drilling stress in the center method of residual-stress measurement Exp Mech 22 26-30
  • [8] Scholtes B(undefined)undefined undefined undefined undefined-undefined
  • [9] Schuster S(undefined)undefined undefined undefined undefined-undefined
  • [10] Pagenkopf J(undefined)undefined undefined undefined undefined-undefined
12