Effect of CuO addition on structure and electrical properties of low temperature sintered quaternary piezoelectric ceramics

被引:0
作者
JIANHUA LI
机构
[1] Chinese People’s Armed Police Force Academy,Department of Scientific Research
来源
Bulletin of Materials Science | 2013年 / 36卷
关键词
Sintering; microstructure-final; piezoelectric properties; perovskites; Jahn–Teller effect.;
D O I
暂无
中图分类号
学科分类号
摘要
The ceramics were prepared successfully by CuO additions to Pb[(Mn1/3Sb2/3)0·06(Ni1/2W1/2)0·02(Zr0·49Ti0·51)0·92]O3. Effect of the addition on sintering temperature, structure and electrical properties of ceramics was investigated. The piezoelectric ceramics was prepared by solid-state reaction. Sintering experiments were accomplished at temperature between 950 and 1100 °C added 0· 3–1· 0 wt% CuO. The sintering temperature was reduced from 1250 °C (without CuO additions) to 970 °C when CuO-doped. The ceramics sintered at 970 °C for 2 h with 0· 7 wt% CuO exhibited εr = 1845, tan δ = 0· 15%, d33 = 395 pC/N, kp = 0· 58 and Qm = 1830, which were the highest values. With increasing CuO doping, Tc becomes lower. Jahn–Teller effect was used to explain the contraction of c-axis and simultaneous extension of a-axis in the lattice.
引用
收藏
页码:877 / 881
页数:4
相关论文
共 36 条
[1]  
Francios B(2007)undefined J. Eur. Ceram. Soc 27 3613-undefined
[2]  
Katrin B(1999)undefined Jpn J. Appl. Phys 38 3596-undefined
[3]  
Morgane R(2006)undefined Mater. Lett 60 3596-undefined
[4]  
Futakuchi T(2004)undefined J. Eur. Ceram. Soc 24 1037-undefined
[5]  
Sugimori H(1999)undefined Jpn J. Appl. Phys 38 5549-undefined
[6]  
Horii K(2004)undefined J. Am. Ceram. Soc 87 847-undefined
[7]  
Han KR(2000)undefined Appl. Phys. Lett 76 1758-undefined
[8]  
Jeong W(1985)undefined J. Am. Ceram. Soc 68 204-undefined
[9]  
Hayashi T(1997)undefined Solid State Commun. 24 769-undefined
[10]  
Tomizawa J(2000)undefined Am. Ceram. Soc. Bull 79 65-undefined