Magnetoelastic Stability of Magnetic Axial Bearings

Permanent magnet bearings offer no wear and no mechanical friction. Recently, Rare Earth (RE) permanent magnets have been used, which give rise to force fields 20 times greater than those of common magnets. RE also allows to build magnets suitable for bearings of every shape. RE bearings are then profitable. On the other hand, permanent magnet bearings are unstable. For example, the levitated ring of the axial bearing with opposite magnetic fields of Fig. 1 is stable axially, but unstable radially. It has been, however, verified that a permanent magnet system may become stable under peculiar conditions. As an example, if the above-mentioned levitated ring is subjected to a parametric axial excitation, its radial instability can be removed. In our opinion, it may also be possible that stability is obtained by exploiting microstructural properties of ferromagnetic materials, especially of RE, like dimensional and magnetic changes if subjected to mechanical stresses. Then, in this paper, the stability of the levitated member of an RE axial ring bearing is investigated by a suitable exploitation of magnetoelastic properties of the ring.Fig. 1Passive magnetic axial ring bearing[graphic not available: see fulltext]