Ternary Ni-Cu-OH and Ni-Co-OH electrodes for electrochemical energy storage

被引:5
作者
Alhebshi N.A. [1 ]
Alshareef H.N. [1 ]
机构
[1] Materials Science and Engineering Program, Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal
关键词
Electrochemical supercapacitors; Graphene; Nickel hydroxide;
D O I
10.1007/s40243-015-0064-7
中图分类号
学科分类号
摘要
In this project, Ni-Cu-OH and Ni-Co-OH ternary electrodes have been prepared. Different Ni:Cu and Ni:Co ratios were deposited by chemical bath deposition (CBD) at room temperature on carbon microfibers. Since Ni(OH)2 is notorious for poor cycling stability, the goal of the work was to determine if doping with Cu or Co could improve Ni(OH)2 cycling stability performance and conductivity against reaction with electrolyte. It is observed that the electrodes with Ni:Cu and Ni:Co composition ratio of 100:10 result in the optimum capacitance and cycling stability in both Ni-Cu-OH and Ni-Co-OH electrodes. This improvement in cycling stability can be attributed to the higher redox reversibility as indicated by the smaller CV redox peak separation. In addition, it is found that decreasing Cu and Co ratios, with fixed CBD time, enhances nanoflakes formation, and hence increases electrode capacitance. For the optimum composition (Ni:Co = 100:10), composites of the ternary electrodes with graphene and carbon nanofibers were also tested, with resultant improvement in potential window, equivalent series resistance, areal capacitance and cycling stability. © 2015 The Author(s).
引用
收藏
相关论文
共 24 条
[1]  
BCC Research. Supercapacitors: Technology Developments and Global Markets. Report No. EGY068B. BCC Research, (2015)
[2]  
Conway B.E., Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications, (1999)
[3]  
Salunkhe R.R., Et al., Nanoarchitectured Graphene-Based Supercapacitors for Next-Generation Energy-Storage Applications, Chem. A Eur. J., 20, pp. 13838-13852, (2014)
[4]  
Faraji S., Ani F.N., The development supercapacitor from activated carbon by electroless plating - A review, Renew. Sustain. Energy Rev., 42, pp. 823-834, (2015)
[5]  
Augustyn V., Simon P., Dunn B., Pseudocapacitive oxide materials for high-rate electrochemical energy storage, Energy Environ. Sci., 7, pp. 1597-1614, (2014)
[6]  
Faraji S., Ani F.N., Microwave-assisted synthesis of metal oxide/hydroxide composite electrodes for high power supercapacitors - A review, J. Power Source, 263, pp. 338-360, (2014)
[7]  
Feng L., Zhu Y., Ding H., Ni C., Recent progress in nickel based materials for high performance pseudocapacitor electrodes, J. Power Source, 267, pp. 430-444, (2014)
[8]  
Zhang K., Et al., Nanostructured Mn-based oxides for electrochemical energy storage and conversion, Chem. Soc. Rev., 44, pp. 699-728, (2015)
[9]  
Abdelhamid M.E., O'Mullane A.P., Snook G.A., Storing energy in plastics: A review on conducting polymers and their role in electrochemical energy storage, RSC Adv., 5, pp. 11611-11626, (2015)
[10]  
Carbonio R.E., Macango V.A., Giordano M.C., Vilche J.R., Arvia A.J., A Transition in the Kinetics of the Ni(OH)<sub>2</sub>/NiOOH Electrode Reaction, J. Electrochem. Soc., 129, pp. 983-991, (1982)