共 90 条
[1]
Ibrahim KM(2013)Microstructure and mechanical properties of cast and heat treated Ti−6.55Al−3.41Mo−1.77Zr alloy Trans Nonferrous Met Soc China 23 3517-3524
[2]
EL Hakeem A(2020)Effect of cooling rate and aging process on wear behavior of TC21 Ti-Alloy Key Eng. Mater. 835 265-273
[3]
Elshaer RN(2014)Severe-to-mild wear transition of titanium alloys as a function of temperature Tribol. Lett. 53 511-520
[4]
Elshaer RN(2016)Accelerated formation of tribo-oxide layer and its effect on sliding wear of a titanium alloy Tribol. Lett. 63 1-13
[5]
Ibrahim KM(2008)An investigation of microstructure, hardness, tensile behaviour of a titanium alloy : role orientation Sadhana 33 235-250
[6]
Ahmed MA(2014)Microstructures of TC21 alloys after hydrogenation and dehydrogenation Trans. Nonferrous Met. Soc. China. 24 82-88
[7]
Ahmed I(2009)Phase transformation in TC21 alloy during continuous heating J. Alloy. Compd. 472 252-256
[8]
Wang WQ(2013)Materials science & engineering a crack initiation and mechanical properties of TC21 titanium alloy with equiaxed microstructure Mater. Sci. Eng. A. 586 215-222
[9]
Zang Q(2016)Influence of solution treatment on microstructure evolution of TC21 titanium alloy with near equiaxed β grains fabricated by laser additive manufacture J. Alloy. Compd. 666 380-386
[10]
Li X(2019)Improvement of fatigue properties of Ti-6Al-4V alloy under four-point bending by low temperature nitriding Int. J. Fatigue 120 134-140