Structure and Magnetic Properties of Mechanically Alloyed Fe90Al8C2 (wt.%) Powders

被引:0
作者
F. Lemdani
S. Alleg
H. Mechri
N. Saoula
F. Hadj-Larbi
M. Azzaz
机构
[1] U.S.T.H.B,Laboratoire Des Sciences Et Génie Des Matériaux
[2] Centre de Développement Des Technologies Avancées CDTA,Laboratoire de Magnétisme Et Spectroscopie Des Solides (LM2S), Département de Physique, Faculté Des Sciences
[3] Université Badji Mokhtar Annaba,undefined
来源
Journal of Superconductivity and Novel Magnetism | 2023年 / 36卷
关键词
Nanostructure; Fe-Al-C system; Mechanical alloying; Rietveld refinement; Magnetic properties;
D O I
暂无
中图分类号
学科分类号
摘要
The structure, morphological, thermal, and magnetic properties of the mechanically alloyed Fe90Al8C2 (wt.%) powders were investigated by using X-ray diffraction (XRD), scanning electron microscopy, differential scanning calorimetry, and vibrating sample magnetometry, respectively. The XRD analysis reveals a mixture of three disordered solid solutions (Fe1-SS, Fe2-SS, and Fe3-SS) with different lattice parameters and crystallite sizes. The saturation magnetization swings between 128 and 133 emu/g, and the coercivity is between 90 and 62 Oe. After heating to 1100 °C, the XRD results show the formation of nanocrystalline (Fe, Al)3C-type carbide and two Fe-type solid solutions. The heated samples exhibit enhanced magnetic properties with enhanced saturation magnetization (Ms = 132.97–179.76 emu/g) and reduced coercivity (Hc = 46.59–53.63 Oe). The composite Fe-Al-C structure can be considered a potential candidate for soft magnetic applications.
引用
收藏
页码:207 / 215
页数:8
相关论文
共 81 条
[1]  
Zuazo I(2014)Low-density steels: complex metallurgy for automotive applications JOM J. Mine. Met. Mater. Soc. 66 1747-1758
[2]  
Hallstedt B(1993)Oxidation/sulfidation of iron-aluminium alloys Mater. High. Temp. 11 30-35
[3]  
Lindahl B(2002)Effect of Al content on oxidation behaviour of ternary Fe-Al-C alloys Intermetallics 10 73-84
[4]  
Selleby M(1995)Magnetic properties, microstructure and magnetic domain structure in anisotropic Fe-Al-C permanent magnet Phys. Status Solidi (A) 151 421-433
[5]  
Soler M(1998)Corrosion resistance of the Fe-Al- C permanent magnet alloy Intermetallics 6 357-362
[6]  
Etienne A(1996)Magnetic properties of the anisotropic Fe-Al-C permanent magnet within the temperature range of 4.2 to 1100 K Phys. Status Solidi (A) 153 487-500
[7]  
Perlade A(1996)Coercivity mechanism in the anisotropic Fe-Al-C permanent magnet Phys. Status Solidi (A) 155 485-495
[8]  
Hasenpouth D(2005)Microstructures and mechanical properties of Fe3Al-based Fe–Al–C alloys Intermetallics 13 1322-1331
[9]  
Massardier-Jourdan V(2011)The ternary iron aluminum carbides J. Alloy. Compd. 509 2729-2733
[10]  
Cazottes S(2009)Thermodynamic assessment and experimental investigation of Fe-Al-C system J. Mater. Sci. Technol. 24 771-774