Simulation and assessment of diamond mill grinding wheel topography

被引：2
作者：
Guochao Qiao
Guojun Dong
Ming Zhou
机构：
[1] Harbin Institute of Technology,School of Mechanical and Electrical Engineering
[2] Northeast Forestry University,School of Mechanical and Electrical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2013年 / 68卷
关键词：
Topography; Simulation; Assessment; Mill grinding wheel; Statistical model;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The topography of grinding wheel has a remarkable effect on grinding process. In this paper, the topographies of two mill grinding wheels with different grain sizes were measured by using an Olympus confocal scanning laser microscope. Kolmogorov–Smirnov normality tests were carried out to obtain distribution characteristics of abrasive grains. The test results indicate that the surface of grind wheel is of non-Gaussian nature. Consequently, a non-Gaussian statistical model was proposed to simulate the mill grinding wheel topography. Simultaneously, some parameters of “Birmingham 14” were introduced to assess the grinding wheel surface quantitatively. Simulated profile of the grinding wheel is found to correspond well in appearance with that of the actual grinding wheel.
引用
收藏
页码：2085 / 2093
页数：8
相关论文
共 49 条
[1]  
Brecher C(2010)New systematic and time-saving procedure to design cup grinding wheels for the application of ultrasonic-assisted grinding Int J Adv Manuf Technol 47 153-159
[2]  
Schug R(2009)An experimental study on the grinding of alumina with a monolayer brazed diamond wheel Int J Adv Manuf Technol 41 16-23
[3]  
Weber A(2002)On the precision grinding of advanced ceramics Int J Adv Manuf Technol 20 255-258
[4]  
Wenzel C(2003)Surface roughness and texture analysis in microscale Wear 254 1001-1009
[5]  
Hannig S(1996)Grinding process simulation based on the wheel topography measurement CIRP Ann Manuf Technol 45 347-350
[6]  
Chen J(2011)Recent trends in surface metrology Wear 271 494-508
[7]  
Huang H(2006)A survey of recent grinding wheel topography models Int J Mach Tool Manuf 46 343-352
[8]  
Xu X(2005)Simulation of precision grinding process, part 1: generation of the grinding wheel surface Int J Mach Tool Manuf 45 1321-1328
[9]  
Horvath M(2002)The simulation of grinding wheels and ground surface roughness based on virtual reality technology J Mater Process Tech 129 123-126
[10]  
Kundrak J(2002)Modeling and predicting surface roughness of the grinding process Int J Mach Tool Manuf 42 969-977
12345