In Situ Aluminum Alloy Coating on Magnesium by Hot Pressing

In the present study, pure magnesium was in situ coated with pre-alloyed Al–Cu–Mg alloy through hot pressing. The produced samples were characterized by means of hardness, wear properties and microstructure characterization. A ball-on-disk test was used to determine the dry sliding wear characteristics of the compacts. The results showed that the hot pressing technique has been successfully applied for producing magnesium parts with compatible wear resistance and hardness to aluminum. The in situ coating of Al on Mg by hot pressing resulted in an increase in hardness of about 30% compared with the pure Mg substrate. The wear rate and friction coefficient of the samples decreased with Al coating and increased with an increase in the applied load during the wear tests, compared with the uncoated material.