Magnetic Characterization of Ferromagnetic Shape Memory Components Under Defined Mechanical Loading

被引：4
作者：
Ehle F. [1 ]
Neumeister P. [1 ]
Haufe E. [1 ]
Neubert H. [1 ]
机构：
[1] Fraunhofer IKTS, Fraunhofer Institute for Ceramic Technologies and Systems, Dresden
来源：
Shape Memory and Superelasticity | 2020年 / 6卷 / 01期
关键词：
Magnetic characterization; Magnetic shape memory; NiMnGa; Simulation;
D O I：
10.1007/s40830-020-00266-2
中图分类号：
学科分类号：
摘要：
The present paper introduces a novel test procedure for the quasistatic magnetic characterization of FSMA (ferromagnetic shape memory alloy) components under mechanical loading for the use in actuator-level modeling. Its development was necessary due to certain requirements coming from the twin structure and shape of typical FSMA components which are not met by the presented test setups up to now. The measurements carried out in the developed test setup are verified by a reference sample and FE simulations. Error sources are discussed and the main systematic error is calculated. After correcting the remaining error, the acquired data correspond well to data from the literature and show a physical consistency. The developed test procedure is hence able to measure effective but absolute magnetization behavior of FSMA components under mechanical loading. These data can directly be applied to any kind of actuator-level models. © 2020, ASM International.
引用
收藏
页码：10 / 23
页数：13
相关论文
共 36 条
  • [1] Ehle F., Ziske J., Neubert H., Price A., Design of magnetic shape memory actuators for compact switchgear, 14Th International Conference on New Actuators (ACTUATOR 2014), pp. 548-551, (2015)
  • [2] Flaga S., Sioma A., Characteristics of experimental MSMA-based pneumatic valves, ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, (2013)
  • [3] Ziske J., Ehle F., Neubert H., Phenomenological models of solid state actuators for network based system modelling, ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, (2014)
  • [4] Pagounis E., Laufenberg M., New ferromagnetic shape memory alloy production and actuator concepts, ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, pp. 105-109, (2012)
  • [5] Coey J.M., Magnetism and magnetic materials, (2010)
  • [6] Heczko O., Ullakko K., Effect of temperature on magnetic properties of Ni-Mn-Ga magnetic shape memory MSM alloys, IEEE Trans Magn, 37, 4, pp. 2672-2674, (2001)
  • [7] Straka L., Magnetic and Magneto-Mechanical Properties of Ni-Mn-Ga Magnetic Shape Memory Alloys, (2007)
  • [8] Straka L., Soroka A., Sozinov A., Tailored magneto-mechanical properties in Ni-Mn-Ga magnetic shape memory crystals, 12Th International Conference on New Actuators (ACTUATOR 2010), pp. 727-730, (2010)
  • [9] Schiepp T., Maier M., Pagounis E., Schluter A., Laufenberg M., FEM-simulation of magnetic shape memory actuators, IEEE Trans Magn, 50, 2, pp. 989-992, (2014)
  • [10] Aaltio I., Soroka A., Ge Y., Soderberg O., Hannula S.-P., High-cycle fatigue of 10M Ni-Mn-Ga magnetic shape memory alloy in reversed mechanical loading, Smart Mater Struct, 19, 7, (2010)
1234