Mechanism of broadening of slab in continuous casting

被引：0
作者：
JianXun Fu
JingShe Li
Hui Zhang
机构：
[1] University of Science&Technology Beijing,School of Metallurgical and Ecological Engineering
[2] University of Jiaozuo,School of Mechatronics Engineering
[3] China Iron & Steel Research Institute Group,National Engineering Research Center of Continuous Casting Technology
来源：
Science China Technological Sciences | 2011年 / 54卷
关键词：
broadening of slab; continuous casting; secondary cooling zone; thermo-mechanical; viscoelastic-plastic;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The mechanism of broadening of slab in continuous casting was studied by numerical simulations and experimental measurements in factories. The mechanism is derived by gradual exclusion of various factors related to the broadening of slab. It is concluded that the slab exposes to no constraint at the direction of narrow face. Because of the static pressure of molten steel, the slab deforms creepily in the direction that consequently results in the broadening of slab. The broadening of slab increases with casting speed and static pressure of molten steel. The decrease of secondary cooling intensity and strength of steel at high temperature also contribute to the broadening of slab. The micro-alloying plays an important role in improving the strength of steel and in reducing the broadening of slab.
引用
收藏
相关论文
共 41 条
[1]  
Fujii H.(1978)On the formation of internal cracks in Continuously cast slabs Trans ISIJ 18 510-518
[2]  
Ohashi T.(1994)Shrinking stresses in a solidifying continuous slab Steel Techno Intl 5 123-130
[3]  
Hiromoto T.(2008)Effects of correlative factors on the interdendritic melt flow brought by the bulge in continuous casting slabs J Univ Sci Technol Beijing Eng Ed 15 407-411
[4]  
Royzman S. E.(1979)Computation of bulging of continuously cast slab with simple bending theory Ironmaking and Steelmaking 2 68-74
[5]  
Chen S. Y.(2005)Metallurgical factors that affect the strand width during continuous casting of DIN 1.4003 stainless steel J South African Institute of Mining and Metallurgy 105 473-481
[6]  
Chang G. W.(2010)Research on slab broadening and mould setting (in Chinese) Steelmaking 26 62-65
[7]  
Wang J. Z.(2010)Relationship between broadening of slab and casting speed (in Chinese) J Iron Steel Res 22 9-11
[8]  
Miyazawa K.(2010)Viscoelastic-plastic analysis of broadening of slab in the secondary cooling zone of continuous casting Acta Metall Sin 46 91-96
[9]  
Schwerdtfeger K.(2007)Thermal-mechanical coupled effect on fracture mechanism and plastic characteristics of sandstone Sci China Ser E-Tech Sci 50 833-843
[10]  
Siyasiya C.(1993)Calculation for bulging deformation of continuously casting slab (in Chinese) Iron Steel 28 20-25
12345