High-strength low-alloy powder steel with a composite structure

被引：0
作者：
Meilakh A.G. [1 ]
机构：
[1] Institute of Metallurgy, Ural Branch, Russian Academy of Sciences, Yekaterinburg
来源：
Steel in Translation | 2009年 / 39卷 / 11期
关键词：
Ferrite; Pearlite; Impact Strength; Iron Powder; Powder Steel;
D O I：
10.3103/S0967091209110199
中图分类号：
学科分类号：
摘要：
The influence of carbon, nanodisperse Ni-Cu alloy, and ZrO2 nanoparticles on the sintering and properties of sprayed iron powder is investigated. The mechanical properties of the new steel with a composite structure exceed by a factor of 2-3 those for the steel of the same composition produced from a mixture of ordinary powder. © Allerton Press, Inc., 2009.
引用
收藏
页码：1035 / 1037
页数：2
相关论文
共 50 条
[41]   Special features of structure formation in sheet low-alloy steel heat treated under industrial conditions [J].
Titova, TI ;
Rivkin, SI ;
Balandin, SY ;
Semernina, IF .
METAL SCIENCE AND HEAT TREATMENT, 2000, 42 (3-4) :142-142
[42]   Insight into stress corrosion cracking in heat-affected zone of Nb micro-alloyed high-strength low-alloy steel in SO2-polluted seawater [J].
Chen, Heng ;
Fan, Endian ;
Li, Chao ;
Huang, Yunhua ;
Lu, Lin ;
Li, Xiaogang .
JOURNAL OF MATERIALS SCIENCE, 2024, 59 (41) :19651-19674
[43]   Dynamic Strength Estimates for a High-Strength Experimental Steel [J].
Torres, K. L. ;
Clements, H. A. ;
Jones, S. E. ;
Dilmore, M. ;
Martin, B. .
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2009, 131 (02)
[44]   Special features of the formation of microstructure of heat-treated low-alloy steel [J].
Spivakov, VI ;
Uzlov, IG ;
Moiseeva, LA ;
Orlov, ÉA ;
Tikhonyuk, LS .
METAL SCIENCE AND HEAT TREATMENT, 1998, 40 (7-8) :313-315
[45]   Special features of the formation of microstructure of heat-treated low-alloy steel [J].
V. I. Spivakov ;
I. G. Uzlov ;
L. A. Moiseeva ;
É. A. Orlov ;
L. S. Tikhonyuk .
Metal Science and Heat Treatment, 1998, 40 :313-315
[46]   Influence of DIT Parameters on the Cementite Spheroidization in a Low-Alloy Medium Carbon Steel [J].
Jon Arruabarrena ;
Beatriz López ;
Jose M. Rodriguez-Ibabe .
Metallurgical and Materials Transactions A, 2016, 47 :412-423
[47]   Achieving Low Yield Ratio in High-Strength Steel by Tuning Multiple Microstructures [J].
Shi, Rongjian ;
Wang, Tengfei ;
Gao, Kewei ;
Wang, Zidong ;
Qiao, Lijie ;
Pang, Xiaolu .
STEEL RESEARCH INTERNATIONAL, 2022, 93 (04)
[48]   Effect of Coiling Temperature on Microstructures and Precipitates in High-Strength Low-Alloy Pipeline Steel after Heavy Reduction during a Six-Pass Rolling Thermo-Mechanical Controlled Process [J].
Lei, Yicong ;
Yang, Wen ;
Siyasiya, Charles W. ;
Tang, Zhenghua .
METALS, 2024, 14 (02)
[49]   Effect of austenitizing temperature and cooling rate on the structure and properties of a ultrahigh strength low alloy steel [J].
N. Kishore Babu ;
M. R. Suresh ;
P. P. Sinha ;
D. S. Sarma .
Journal of Materials Science, 2006, 41 :2971-2980
[50]   METAL DUSTING OF LOW-ALLOY AND HIGH-ALLOY STEELS [J].
GRABKE, HJ .
CORROSION, 1995, 51 (09) :711-720
12345