In Situ TiC Particles-Reinforced Body-Centered-Cubic Ni0.6CoFe1.4 Medium-Entropy Alloys for High Hardness and Good Wear Resistance

被引：0

作者：

Jian Wu

Xiaoyan Liu

Peng Sang

Yue Xu

Heguo Zhu

机构：

[1] Nanjing University of Science and Technology,College of Materials Science and Engineering

来源：

Metallurgical and Materials Transactions A | 2024年 / 55卷

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

TiC particles were in situ synthesized in body-centered-cubic (BCC) Ni0.6CoFe1.4 MEAs by vacuum induction melting. Results showed that both the hardness and wear resistance of the as-cast composites are significantly improved with the increase of TiC content. TiC particles dispersed inside matrix could not only effectively retard the adhesive wear and abrasive wear by increasing the hardness of alloy, but also promote the formation of lubricating tribo-oxide layer on the worn surface during sliding process.

引用

页码：992 / 997

页数：5

共 3 条

[1] In Situ TiC Particles-Reinforced Body-Centered-Cubic Ni0.6CoFe1.4 Medium-Entropy Alloys for High Hardness and Good Wear Resistance
Wu, Jian
Liu, Xiaoyan
Sang, Peng
Xu, Yue
Zhu, Heguo
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (04): : 992 - 997
[2] In-situ (Nb,Ti)C particles reinforced Ni0.6CoFe1.4Nb0.05 medium-entropy alloys
Wu, Jian
Zhu, Xinghua
Zhu, Heguo
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 113
[3] A novel ultra-high-strength duplex Al-Co-Cr-Fe-Ni high-entropy alloy reinforced with body-centered-cubic ordered-phase particles
Lim, Ka Ram
Kwon, Heoun Jun
Kang, Joo-Hee
Won, Jong Woo
Na, Young Sang
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 771

← 1 →