A fracture criterion for sharp V-notched samples

被引：0
作者：
F.J. Gómez
M. Elices
机构：
[1] Universidad Politécnica de Madrid,Departamento de Ciencia de Materiales
来源：
International Journal of Fracture | 2003年 / 123卷
关键词：
cohesive crack; duraliminum; fracture criterion; fracture mechanics; PMMA; PVC; steel; V-notch;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The objective of this paper is to show the advantages of the cohesivecrack model for predicting fracture of V-notched components. Criticalvalues of the generalized stress intensity factor can be obtained fromthe knowledge of the material softening function and the elastic parameters,avoiding a cumbersome experimental work. The results were checked successfullyagainst experimental ones, from other authors, in different materials: steel,aluminium, PMMA and PVC. A non dimensional formulation of the fracturecriterion for sharp V-notched components was obtained and a simpleapproximate expression derived for easy appication.
引用
收藏
页码：163 / 175
页数：12
相关论文
共 50 条
[31]   Mixed mode I/II brittle fracture in V-notched Brazilian disk specimens under negative mode I conditions [J].
Torabi, A. R. ;
Bahrami, B. ;
Ayatollahi, M. R. .
PHYSICAL MESOMECHANICS, 2016, 19 (03) :332-348
[32]   Mixed mode I/II brittle fracture in V-notched Brazilian disk specimens under negative mode I conditions [J].
A. R. Torabi ;
B. Bahrami ;
M. R. Ayatollahi .
Physical Mesomechanics, 2016, 19 :332-348
[33]   J-integral evaluation for V-notched ductile plates subjected to tension [J].
Torabi A.R. ;
Majidi H.R. ;
Zabihi M. .
Material Design and Processing Communications, 2020, 2 (02)
[34]   Finite element analyses of singular stresses in tips of V-notched anisotropic plates [J].
Ping, Xuecheng ;
Chen, Mengcheng ;
Xie, Jilong .
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2007, VOLS 1 AND 2, 2007, :1105-1111
[35]   Bi-material V-notched SIFs analysis by XFEM and conservative integral approach [J].
Yi, Gao ;
Yu, Tiantang ;
Tinh Quoc Bui ;
Tanaka, Satoyuki .
COMPUTERS & STRUCTURES, 2018, 196 :217-232
[36]   A fracture criterion for high-strength steel notched bars [J].
Toribio, J .
ENGINEERING FRACTURE MECHANICS, 1997, 57 (04) :391-404
[37]   Machine learning-based determination of Mode II translaminar fracture toughness of composite laminates from simple V-notched shear tests [J].
Qiu, Cheng ;
Gui, Yizhuo ;
Ma, Jiwen ;
Song, Hongwei ;
Yang, Jinglei .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2024, 184
[38]   Determination of the fatigue critical distance according to the Line and the Point Methods with rounded V-notched specimen [J].
Santus, C. ;
Taylor, D. ;
Benedetti, M. .
INTERNATIONAL JOURNAL OF FATIGUE, 2018, 106 :208-218
[39]   Evaluation of heat flux intensity factor for a V-notched structure by the isogeometric boundary element method [J].
Wang, Feiyang ;
Cheng, Changzheng ;
Li, Tengyue ;
Liu, Jingwen ;
Han, Zhilin .
ENGINEERING FRACTURE MECHANICS, 2025, 314
[40]   Loading rate effect on mixed-mode I plus II fracture of V-notched Brazilian disc rock specimen under impact loads [J].
Liu, Wei ;
Li, Yulong ;
Zhang, Zhiqian ;
Yang, Liyun ;
Luo, Yi ;
Yue, Zhongwen .
ENGINEERING FRACTURE MECHANICS, 2023, 291
12345