Force prediction for single point incremental forming deduced from experimental and FEM observations

被引：0
作者：
R. Aerens
P. Eyckens
A. Van Bael
J. R. Duflou
机构：
[1] K.U.Leuven,Department of Mechanical Engineering
[2] K.U.Leuven,Department of Metallurgy and Materials Engineering
[3] KHLim,Department IWT
来源：
The International Journal of Advanced Manufacturing Technology | 2010年 / 46卷
关键词：
Single point incremental forming; Rapid prototyping; Sheet metal forming; Forces; Process modeling;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The aim of the study was to establish practical formulae allowing to predict the forces occurring during the single point incremental forming process. This study has been based on a large set of systematic experiments on the one hand and on results of finite elements modeling simulations on the other. This led to analytical formulae allowing to compute the three main components of the force for five selected materials in function of the working conditions (sheet thickness, wall angle, tool diameter, and step down) with a good precision. Moreover, a general model has been deduced, allowing to compute an approximate value for the force for any material, based on knowledge of the tensile strength only.
引用
收藏
页码：969 / 982
页数：13
相关论文
共 50 条
  • [21] Investigation of a radial toolpath in single point incremental forming
    Grimm, Tyler J.
    Mears, Laine
    48TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 48, 2020, 48 : 215 - 222
  • [22] Theory of single point incremental forming
    Martins, P. A. F.
    Bay, N.
    Skjoedt, M.
    Silva, M. B.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2008, 57 (01) : 247 - 252
  • [23] Optical study for springback prediction, thickness reduction and forces variations on single point incremental forming
    Rosca, Nicolae
    Oleksik, Valentin
    Pascu, Adrian
    Oleksik, Mihaela
    Avrigean, Eugen
    MATERIALS TODAY-PROCEEDINGS, 2019, 12 : 213 - 218
  • [24] Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity
    C. Henrard
    C. Bouffioux
    P. Eyckens
    H. Sol
    J. R. Duflou
    P. Van Houtte
    A. Van Bael
    L. Duchêne
    A. M. Habraken
    Computational Mechanics, 2011, 47 : 573 - 590
  • [25] Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity
    Henrard, C.
    Bouffioux, C.
    Eyckens, P.
    Sol, H.
    Duflou, J. R.
    Van Houtte, P.
    Van Bael, A.
    Duchene, L.
    Habraken, A. M.
    COMPUTATIONAL MECHANICS, 2011, 47 (05) : 573 - 590
  • [26] Damage prediction in single point incremental forming using an extended Gurson model
    Felipe Guzman, Carlos
    Yuan, Sibo
    Duchene, Laurent
    Saavedra Flares, Erick I.
    Habraken, Anne Marie
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2018, 151 : 45 - 56
  • [27] Deciphering the deformation mechanism in single point incremental forming: experimental and numerical investigation
    Yazar, K. U.
    Mishra, Sumeet
    Narasimhan, K.
    Date, P. P.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 101 (9-12) : 2355 - 2366
  • [28] Deciphering the deformation mechanism in single point incremental forming: experimental and numerical investigation
    K. U. Yazar
    Sumeet Mishra
    K. Narasimhan
    P. P. Date
    The International Journal of Advanced Manufacturing Technology, 2019, 101 : 2355 - 2366
  • [29] On the potential of single point incremental forming of sheet polymer parts
    Tania A. Marques
    Maria Beatriz Silva
    P. A. F. Martins
    The International Journal of Advanced Manufacturing Technology, 2012, 60 : 75 - 86
  • [30] Enhancing time efficiency on single point incremental forming processes
    Pereira Bastos, Ricardo N.
    Alves de Sousa, Ricardo J.
    Fernandes Ferreira, Jorge A.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2016, 9 (05) : 653 - 662
12345