共 220 条
[1]
Nene S.S.(2014)Microstructure refinement and its effect on specific strength and bio-corrosion resistance in ultralight Mg–4Li–1Ca (LC41) alloy by hot rolling J. Alloys Compd. 615 501-506
[2]
Kashyap B.P.(2005)Mechanisms of creep deformation in Mg–Sc–based alloys Metall. Mater. Trans. A 36 1729-1736
[3]
Prabhu N.(1999)Plasma electrolysis for surface engineering Surf. Coat. Technol. 122 73-93
[4]
Estrin Y.(2015)High growth rate, wear resistant coatings on an Al–Cu–Li alloy by plasma electrolytic oxidation in concentrated aluminate electrolytes Surf. Coat. Technol. 269 74-82
[5]
Al-Samman T.(2013)Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior Surf. Coat. Technol. 226 100-107
[6]
Mordike B.L.(2011)Aluminum A356 reinforcement by carbide nanoparticles J. Nano Res. 13 41-46
[7]
Stulikova I.(2015)Correlation between plasma electrolytic oxidation treatment stages and coating microstructure on aluminum under unipolar pulsed DC mode Surf. Coat. Technol. 269 91-99
[8]
Smola B.(2006)Silicon effects on formation of EPO oxide coatings on aluminum alloys Thin Solid Films 494 211-218
[9]
Yerokhin A.(2017)An investigation of oxide coating synthesized on an aluminum alloy by plasma electrolytic oxidation in molten salt Appl. Sci. 7 889-898
[10]
Nie X.(2013)Production of ceramic layers on aluminum alloys by plasma electrolytic oxidation in alkaline silicate electrolytes Appl. Surf. Sci. 264 743-747