Morphology, mechanical, and fracture properties of HNBR modified ASA/SAN blends

被引：0

作者：

Wei Zhang

Jun Zhang

机构：

[1] Nanjing University of Technology,Department of Polymer Science and Engineering, College of Materials Science and Engineering

来源：

Polymer Science Series A | 2014年 / 56卷

关键词：

Differential Scanning Calorimetry; Fracture Property; Flexural Strength; Impact Strength; Polymer Science Series;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

In this work, acrylonitrile-styrene-acrylic terpolymer/styrene-acrylonitrile copolymer/hydrogenated nitrile rubber (ASA/SAN/HNBR) ternary blends with different composition were prepared by melt blending. Properties of the ternary blends were studied by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMTA), Fourier transform infrared spectra (FTIR), heat distortion temperature (HDT), melt flow rate (MFR), and Scanning electron microscopy (SEM). The results showed that the incorporation of HNBR can enhance the toughness by a large scale, and the two rubber phase showed partial miscibility. Heat resistance of the blends almost unchanged with HNBR content. FTIR told that the preparation of the ternary blends was a physical process, and no obvious phase separation was observed in SEM images.

引用

页码：296 / 303

页数：7

共 50 条

[21] Morphology and Mechanical Properties of PP/LLDPE Blends and Ternary PP/LLDPE/Nano-CaCO3 Composites [J].

H. Cheraghi ;

F. A. Ghasemi ;

G. Payganeh .

Strength of Materials, 2013, 45 :730-738

[22] Morphology and Mechanical Properties of PP/LLDPE Blends and Ternary PP/LLDPE/Nano-CaCO3 Composites [J].

Cheraghi, H. ;

Ghasemi, F. A. ;

Payganeh, G. .

STRENGTH OF MATERIALS, 2013, 45 (06) :730-738

[23] Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite [J].

S. Dalle Vacche ;

C. J. G. Plummer ;

C. Houphouët-Boigny ;

J.-A. E. Månson .

Journal of Materials Science, 2011, 46 :2112-2122

[24] Compatibilizing Effect of Poly(methyl methacrylate-co-maleic anhydride) on the Morphology and Mechanical Properties of Polyketone/Polycarbonate Blends [J].

Ikseong Jeon ;

Seung Woo Lee ;

Jae Young Jho .

Macromolecular Research, 2019, 27 :821-826

[25] Compatibilizing Effect of Poly(methyl methacrylate-co-maleic anhydride) on the Morphology and Mechanical Properties of Polyketone/Polycarbonate Blends [J].

Jeon, Ikseong ;

Lee, Seung Woo ;

Jho, Jae Young .

MACROMOLECULAR RESEARCH, 2019, 27 (08) :821-826

[26] CORRELATION BETWEEN MORPHOLOGY WITH DYNAMIC MECHANICAL, THERMAL, PHYSICOMECHANICAL PROPERTIES AND ELECTRICAL-CONDUCTIVITY FOR EVA-LDPE BLENDS [J].

RAY, I ;

KHASTGIR, D .

POLYMER, 1993, 34 (10) :2030-2037

[27] Mechanical properties of epoxy resin modified with polycarbonate and reactive polybutadiene [J].

Bakar, M. ;

Kobusinska, J. ;

Szczerba, J. .

JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 106 (05) :2892-2897

[28] Morphology, mechanical and thermal behavior of acrylate rubber/fluorocarbon elastomer/polyacrylate blends [J].

M. Abdul Kader ;

A. K. Bhowmick ;

T. Inoue ;

T. Chiba .

Journal of Materials Science, 2002, 37 :1503-1513

[29] Effects of morphology on mechanical properties of styrene-butadiene-styrene triblock copolymer/methyl methacrylate-styrene copolymer blends [J].

Yamaoka, I .

POLYMER, 1996, 37 (24) :5343-5356

[30] The Influence of NBR-g-GMA Compatibilizer on the Morphology and Mechanical Properties of Poly (ethylene terephthalate)/Polycarbonate/NBR Ternary Blends [J].

Jazani, Omid Moini ;

Arefazar, Ahmad ;

Peymanfar, Mohammad Reza ;

Saeb, Mohammad Reza ;

Talaei, Alireza ;

Bahadori, Behnoosh .

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2013, 52 (13) :1295-1302

← 1 2 3 4 5 →