Morphology, mechanical, and fracture properties of HNBR modified ASA/SAN blends

被引：0

作者：

Wei Zhang

Jun Zhang

机构：

[1] Nanjing University of Technology,Department of Polymer Science and Engineering, College of Materials Science and Engineering

来源：

Polymer Science Series A | 2014年 / 56卷

关键词：

Differential Scanning Calorimetry; Fracture Property; Flexural Strength; Impact Strength; Polymer Science Series;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

In this work, acrylonitrile-styrene-acrylic terpolymer/styrene-acrylonitrile copolymer/hydrogenated nitrile rubber (ASA/SAN/HNBR) ternary blends with different composition were prepared by melt blending. Properties of the ternary blends were studied by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMTA), Fourier transform infrared spectra (FTIR), heat distortion temperature (HDT), melt flow rate (MFR), and Scanning electron microscopy (SEM). The results showed that the incorporation of HNBR can enhance the toughness by a large scale, and the two rubber phase showed partial miscibility. Heat resistance of the blends almost unchanged with HNBR content. FTIR told that the preparation of the ternary blends was a physical process, and no obvious phase separation was observed in SEM images.

引用

页码：296 / 303

页数：7

共 50 条

[11] Research on cellular morphology and mechanical properties of microcellular injection–molded BCPP and its blends [J].

Jiachang Wang ;

Guilong Wang ;

Jinchuan Zhao ;

Aimin Zhang ;

Guiwei Dong ;

Xiebin Wang ;

Guoqun Zhao ;

Chul B. Park .

The International Journal of Advanced Manufacturing Technology, 2021, 116 :2223-2241

[12] Low temperature fracture properties of polymer-modified asphalts relationships with the morphology [J].

L. Champion ;

J.-F. Gerard ;

J.-P. Planche ;

D. Martin ;

D. Anderson .

Journal of Materials Science, 2001, 36 :451-460

[13] Research on cellular morphology and mechanical properties of microcellular injection-molded BCPP and its blends [J].

Wang, Jiachang ;

Wang, Guilong ;

Zhao, Jinchuan ;

Zhang, Aimin ;

Dong, Guiwei ;

Wang, Xiebin ;

Zhao, Guoqun ;

Park, Chul B. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 116 (7-8) :2223-2241

[14] Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends [J].

Pankaj Agrawal ;

Edcleide M. Araújo ;

Tomás J. A. Mélo .

Journal of Materials Science, 2008, 43 :4443-4449

[15] Isotactic polypropylene (PP) modified by ABS and CaCO3 nanoparticles: effect of composition and compatibilization on the phase morphology, mechanical properties and fracture behavior [J].

Momen, Omid ;

Mehrabi-Mazidi, Majid ;

Jahangiri, Neda .

POLYMER BULLETIN, 2015, 72 (11) :2757-2782

[16] MORPHOLOGY PROPERTIES RELATIONSHIP IN TERNARY POLYAMIDE-6/LDPE/MODIFIED LDPE BLENDS .2. [J].

RAVAL, H ;

SINGH, YP ;

MEHTA, MH ;

DEVI, S .

POLYMER INTERNATIONAL, 1991, 26 (02) :105-113

[17] Interfacially compatibilized LDPE/POE blends reinforced with nanoclay: investigation of morphology, rheology and dynamic mechanical properties [J].

Baghaei, B. ;

Jafari, S. H. ;

Khonakdar, H. A. ;

Rezaeian, I. ;

As'habi, L. ;

Ahmadian, S. .

POLYMER BULLETIN, 2009, 62 (02) :255-270

[18] Effect of polycarbonate (PC) content on the mechanical properties, morphology and transesterification mechanism of PBT/PC immiscible blends [J].

Mane, Prajakta ;

Keche, Ashok J. ;

Chopra, Swamini ;

Pande, Kavita .

JOURNAL OF APPLIED POLYMER SCIENCE, 2024, 141 (36)

[19] Biosourced Poly(lactic acid)/polyamide-11 Blends: Effect of an Elastomer on the Morphology and Mechanical Properties [J].

Fazli, Ali ;

Rodrigue, Denis .

MOLECULES, 2022, 27 (20)

[20] Structure and mechanical properties of thermoplastics modified with nanodiamonds [J].

V. V. Karbushev ;

A. V. Semakov ;

V. G. Kulichikhin .

Polymer Science Series A, 2011, 53 :765-774

← 1 2 3 4 5 →