Effects of feeding ratio on flange bending in shear spinning

被引：0
|
作者：
Shi-Hong Zhang
Xin-Yu Lu
Hai Liu
Hong-Liang Hou
Zhi-Qiang Li
Yuan-Song Zeng
机构：
[1] Institute of Metal Research,
[2] Chinese Academy of Sciences,undefined
[3] Beijing Aeronautical Manufacturing Technology Research Institute,undefined
来源：
International Journal of Material Forming | 2011年 / 4卷
关键词：
Shear spinning; Flange bending; Feeding ratio; Energy method;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of feeding ratio on flange bending of shear spinning are investigated with analytical method. Firstly, influence of feeding ratio on total energy is analyzed utilizing the formula of shear spinning force and power derived by energy method. Subsequently, the connection between the deviation ratio and the thinning ratio, and the influence of feeding ratio on the thinning ratio are researched. Finally, the conclusions about the deviation ratio and flange bending are adopted to reveal the influential tendency of feeding ratio on flange bending. The results show that the flange bending towards headstock weakens with the increase of feeding ratio, which is verified by the experimental results very well. It indicates that the calculation method in this paper is reasonable.
引用
收藏
页码：413 / 419
页数：6
相关论文
共 50 条
  • [41] Effect of blank quenching on shear spinning forming precision of 2219 aluminum alloy complex thin-walled components
    LI, Zhixin
    Zhan, Mei
    Fan, Xiaoguang
    Dong, Yunda
    Xu, Luopeng
    CHINESE JOURNAL OF AERONAUTICS, 2023, 36 (04) : 538 - 555
  • [42] Process design and microstructure-property evolution during shear spinning of Ti2AlNb-based alloy
    Wang, Sibing
    Xu, Wenchen
    Shao, Bin
    Yang, Guoping
    Zong, Yingying
    Sun, Wanting
    Yang, Zhongze
    Shan, Debin
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2022, 101 : 1 - 17
  • [43] Double cylinder forming by die-less shear spinning for air intake lip skin of aero jet engine nacelle
    Suzuki, Nobuyuki
    Tokuhiro, Satoshi
    Takeuchi, Osamu
    PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 : 1270 - 1277
  • [44] ELASTIC BUCKLING STRENGTH of H-SHAPED TAPERED BEAM-COLUMNS under AXIAL and BENDING SHEAR FORCE
    Ikarashi, Kikuo
    Hasegawa, Ryuta
    Journal of Structural and Construction Engineering, 2015, 80 (716): : 1599 - 1609
  • [45] NON-LINEAR ANALYSIS OF FUNCTIONALLY GRADED PLATES IN CYLINDRICAL BENDING BASED ON A NEW REFINED SHEAR DEFORMATION THEORY
    Derras, Mokhtar
    Kaci, Abdelhakim
    Draiche, Kada
    Tounsi, Abdelouahed
    JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2013, 51 (02) : 339 - 348
  • [46] Effect of Main/Side Feeding Ratio of Carbon Fiber on the Properties of Nylon 66/Carbon Fiber Composites
    Kim, Yu Shin
    Kim, Jun Seok
    Kim, Youn Cheol
    POLYMER-KOREA, 2019, 43 (03) : 440 - 446
  • [47] Evaluation of coupled local buckling strength of square hollow section member under biaxial bending shear force and axial force
    1909, Architectural Institute of Japan (79): : 1909 - 1918
  • [48] Online Control Model of Rolling Force Considering Shear Strain Effects
    Wang, Gui-guo
    Du, Feng-shan
    Li, Xue-tong
    Zang, Xin-liang
    ADVANCED DESIGN AND MANUFACTURE TO GAIN A COMPETITIVE EDGE: NEW MANUFACTURING TECHNIQUES AND THEIR ROLE IN IMPROVING ENTERPRISE PERFORMANCE, 2008, : 325 - 333
  • [49] Influence of feeding ratio and size on susceptibility to microsporidial gill disease caused by Loma salmonae in rainbow trout, Oncorhynchus mykiss (Walbaum)
    Becker, JA
    Speare, DJ
    Dohoo, IR
    JOURNAL OF FISH DISEASES, 2005, 28 (03) : 173 - 180
  • [50] Fatigue Modeling for Superelastic NiTi Considering Cyclic Deformation and Load Ratio Effects
    Mahtabi M.J.
    Shamsaei N.
    Shape Memory and Superelasticity, 2017, 3 (3) : 250 - 263
12345