Effects of feeding ratio on flange bending in shear spinning

被引：0
|
作者：
Shi-Hong Zhang
Xin-Yu Lu
Hai Liu
Hong-Liang Hou
Zhi-Qiang Li
Yuan-Song Zeng
机构：
[1] Institute of Metal Research,
[2] Chinese Academy of Sciences,undefined
[3] Beijing Aeronautical Manufacturing Technology Research Institute,undefined
来源：
International Journal of Material Forming | 2011年 / 4卷
关键词：
Shear spinning; Flange bending; Feeding ratio; Energy method;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of feeding ratio on flange bending of shear spinning are investigated with analytical method. Firstly, influence of feeding ratio on total energy is analyzed utilizing the formula of shear spinning force and power derived by energy method. Subsequently, the connection between the deviation ratio and the thinning ratio, and the influence of feeding ratio on the thinning ratio are researched. Finally, the conclusions about the deviation ratio and flange bending are adopted to reveal the influential tendency of feeding ratio on flange bending. The results show that the flange bending towards headstock weakens with the increase of feeding ratio, which is verified by the experimental results very well. It indicates that the calculation method in this paper is reasonable.
引用
收藏
页码：413 / 419
页数：6
相关论文
共 50 条
  • [31] Deformation behaviour and microstructure evolution of AlMg6Mn alloy during shear spinning
    Radovic, Lj.
    Nikacevic, M.
    Jordovic, B.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (05) : 991 - 1000
  • [32] Investigation of microstructure and mechanical properties of copper shell produced by shear spinning in different rotation directions
    Hoseini, Seyed Mohammad Javad
    Ghayour, Hamid
    Golazani, Ali Salemi
    Asgarani, Masoud Kasiri
    Ebrahimzadeh, Iman
    MATERIALS RESEARCH EXPRESS, 2021, 8 (06)
  • [33] Three-dimensional cancer cell culture in high-yield multiscale scaffolds by shear spinning
    Ahmed, Ahmed A.
    Luo, C. J.
    Perez-Garrido, Sandra
    Browse, Connor R.
    Thrasivoulou, Christopher
    Stoyanov, Simeon D.
    Smoukov, Stoyan K.
    Gout, Ivan
    BIOTECHNOLOGY PROGRESS, 2019, 35 (02)
  • [34] Simplified three-dimensional finite element simulation of shear spinning process based on axisymmetric modeling
    Mori, K
    Nonaka, T
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL 32, 2004, 2004, : 621 - 627
  • [35] Some aspects of microstructure and properties of Al-Mg alloys after shear spinning and cold rolling
    Radovic, Ljubica M.
    Nikacevic, Milutin Z.
    Jordovic, Branka M.
    HEMIJSKA INDUSTRIJA, 2013, 67 (05) : 707 - 714
  • [36] A study on evaluation of elastic buckling strength of anisotropic plate under bending stress and shear stress
    Dept. of Arch. and Building Eng., Tokyo Institute of Technology, Japan
    J. Struct. Constr. Eng., 2009, 638 (711-720): : 711 - 720
  • [37] Microstructure and Mechanical Properties of Mg-3Al-Zn Magnesium Alloy Sheet by Hot Shear Spinning
    Wang, Fenghua
    Su, Peng
    Qin, Linxin
    Dong, Shuai
    Li, Yunliang
    Dong, Jie
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2020, 33 (09) : 1226 - 1234
  • [38] Microstructure and Mechanical Properties of Mg–3Al–Zn Magnesium Alloy Sheet by Hot Shear Spinning
    Fenghua Wang
    Peng Su
    Linxin Qin
    Shuai Dong
    Yunliang Li
    Jie Dong
    Acta Metallurgica Sinica (English Letters), 2020, 33 : 1226 - 1234
  • [39] Innovative poly(2,6-dimethy-1,4-phenylene) oxide nanomaterials by shear spinning solution
    Pathak, Mohit
    Lettieri, Mariateresa
    Daniel, Christophe
    POLYMER, 2025, 324
  • [40] Theoretical analysis and evaluation for cupled buckling strength of h-shaped beams under bending shear
    Dept. of Architecture and Building Engineering, Graduate School of Science and Engineering, Tokyo Institute of Technology, Japan
    J. Struct. Constr. Eng., 2008, 623 (135-142): : 135 - 142
12345