Effects of feeding ratio on flange bending in shear spinning

被引：0
|
作者：
Shi-Hong Zhang
Xin-Yu Lu
Hai Liu
Hong-Liang Hou
Zhi-Qiang Li
Yuan-Song Zeng
机构：
[1] Institute of Metal Research,
[2] Chinese Academy of Sciences,undefined
[3] Beijing Aeronautical Manufacturing Technology Research Institute,undefined
来源：
International Journal of Material Forming | 2011年 / 4卷
关键词：
Shear spinning; Flange bending; Feeding ratio; Energy method;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of feeding ratio on flange bending of shear spinning are investigated with analytical method. Firstly, influence of feeding ratio on total energy is analyzed utilizing the formula of shear spinning force and power derived by energy method. Subsequently, the connection between the deviation ratio and the thinning ratio, and the influence of feeding ratio on the thinning ratio are researched. Finally, the conclusions about the deviation ratio and flange bending are adopted to reveal the influential tendency of feeding ratio on flange bending. The results show that the flange bending towards headstock weakens with the increase of feeding ratio, which is verified by the experimental results very well. It indicates that the calculation method in this paper is reasonable.
引用
收藏
页码：413 / 419
页数：6
相关论文
共 50 条
  • [21] Effects of the feeding ratio of food waste on fed-batch aerobic composting and its microbial community
    Wang, Xiaojun
    Pan, Songqing
    Zhang, Zhaoji
    Lin, Xiangyu
    Zhang, Yuzhen
    Chen, Shaohua
    BIORESOURCE TECHNOLOGY, 2017, 224 : 397 - 404
  • [22] Mechanism of grain refinement of aluminium alloy in shear spinning under different deviation ratios
    Zhan, Mei
    Wang, Xianxian
    Long, Hui
    MATERIALS & DESIGN, 2016, 108 : 207 - 216
  • [23] A flexible shear spinning of axi-symmetrical shells with a general-purpose mandrel
    Kawai, K.
    Yang, L.-N.
    Kudo, H.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 192 : 13 - 17
  • [24] Visual scanning for off-line automatic tool path generation for shear spinning
    Hanafi, D
    Rodnay, G
    Tordon, M
    Katupitiya, J
    PROCEEDINGS OF THE 2003 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM 2003), VOLS 1 AND 2, 2003, : 1182 - 1187
  • [25] Forecast of shear spinning force and surface roughness of spun cones by employing regression analysis
    Chen, MD
    Hsu, RQ
    Fuh, KH
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (12) : 1721 - 1734
  • [26] Cylindrical forming of aluminum alloy sheet using die-less shear spinning
    Suzuki N.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2016, 66 (07): : 345 - 351
  • [27] Elastic lateral buckling strength oftaperedh-shapedbeam under shear bending
    Ikarashi, Kikuo
    Yoshizawa, Katsuhito
    Journal of Structural and Construction Engineering, 2013, 78 (690): : 1493 - 1501
  • [28] Automatic off-line tool path generation for shear spinning using active vision
    Hanafi, D
    Rodnay, G
    Tordon, M
    Katupitiya, J
    PROCEEDINGS OF THE 2003 IEEE INTERNATIONAL SYMPOSIUM ON INTELLIGENT CONTROL, 2003, : 405 - 410
  • [29] Enhancing object profile resolution when using low resolution machine vision for shear spinning
    Hanafi, D
    Tordon, M
    Katupitiya, J
    6TH WORLD MULTICONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL III, PROCEEDINGS: IMAGE, ACOUSTIC, SPEECH AND SIGNAL PROCESSING I, 2002, : 33 - 38
  • [30] Cylinder forming by die-less shear spinning with sheet thickness controlling of its wall
    Tokuhiro, Satoshi
    Suzuki, Nobuyuki
    Takeuchi, Osamu
    PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 : 1232 - 1238
12345