Performance and simulation of thermoplastic micro injection molding

被引：0

作者：

Piotter V. ^{[1
]}

Mueller K. ^{[1
]}

Plewa K. ^{[1
]}

Ruprecht R. ^{[1
]}

Hausselt J. ^{[1
]}

机构：

[1] Forschungszentrum Karlsruhe GmbH, Institut fuer Materialforschung III, 76021 Karlsruhe

来源：

Microsystem Technologies | 2002年 / 8卷 / 6期

关键词：

Aspect Ratio; Manufacturing Process; Software Tool; Technological Product; Injection Molding;

D O I：

10.1007/s00542-002-0178-6

中图分类号：

学科分类号：

摘要：

Originally developed for the replication of high aspect ratio LIGA structures, micro injection molding is presently on its way to become an established manufacturing process. Enhanced technological products like micro optical devices are entering the market. New developments like the different kinds of injection molding with several components open up opportunities for increasing economic efficiency as well as for new fields of applications. Software tools for the simulation of the thermal household of the molding tool and/or the moldfilling process itself can provide useful but not wholly sufficient assistance for the optimization of micro injection molding.

引用

页码：387 / 390

页数：3

共 8 条

[1]

Michaeli W., Ziegmann C., Mikrosysteme aus dem spritzgießwerkzeug

[2]

F & M feinwerktechnik, Annual set, 107, 9, pp. 51-54, (1999)

[3]

Norajitra P., Et al., Computersimulation zur ver-besserung der wirtschaftlichkeit beim spritzgießen von kunststoffmikrostrukturen, Proceedings of Werkstoffwoche 1996, Symposium, 8, pp. 279-284, (1997)

[4]

Rogalla A., Analyse des Spritzgießens mikro-strukturierter Bauteile aus Thermoplasten, (1998)

[5]

Ruprecht R., Et al., Molding technologies for microstructured components made of plastics and metals, Proceedings of the 4th Statuskolloquium Mikrosystemtechnik, FZKA 6423, pp. 31-36, (2000)

[6]

Schinkoethe W., Walther T., Zykluszeiten verringern, Annual Set, 90, 5, pp. 62-68, (2000)

[7]

Schworer M., Entwicklung fluidischer mikrogelenke, FZK Report, 6189, (1998)

[8]

Wallrabe U., Et al., RibCon: Micromolded easy-assembly multi fiber connector for single- and multi- mode applications, Proceedings of DTIP Conference SPIE, 4408, pp. 478-485, (2001)

← 1 →