Nitride nanopowders by azide SHS technology

被引：3

作者：

Amosov A.P. ^{[1
]}

Bichurov G.V. ^{[1
]}

Kondrat’eva L.A. ^{[1
]}

Kerson I.A. ^{[1
]}

机构：

[1] Samara State Technical University, Samara

来源：

International Journal of Self-Propagating High-Temperature Synthesis | 2017年 / 26卷 / 01期

关键词：

AlN–BN; and Si[!sub]3[!/sub]N[!sub]4[!/sub]–TiN nanopowders; azide SHS; sodium azide; TiN–BN;

D O I：

10.3103/S1061386217010034

中图分类号：

学科分类号：

摘要：

Azide SHS technology with NaN3 powder as a nitriding agent was used to fabricate TiN–BN, AlN–BN, and Si3N4–TiN nanopowders using Nа2TiF6, (NH4)2TiF6, KBF4, NH4BF4, Nа3AlF6, AlF3, Na2SiF6, and (NH4)2SiF6 as precursors. Mixtures of the above salts with sodium azide NaN3 readily burned in an SHS reactor to yield agglomerated nanosized or fine target powders. Phase composition of combustion products not always corresponded to expectations and often contained insoluble byproducts. Reported are optimal green compositions and procedures that afford the preparation of target TiN–BN, AlN–BN, and Si3N4–TiN nanopowders free of byproducts. © 2017, Allerton Press, Inc.

引用

页码：11 / 21

页数：10

共 19 条

[1]

Basu B., Balani K., Advanced Structural Ceramics, (2011)

[2]

Pierson H.O., Handbook of Refractory Carbides and Nitrides: Properties, Characteristics, Processing, and Applications, (1996)

[3]

Zhang G.-J., Yang J.-F., Ando M., Ohji T., Nonoxide–boron nitride composites: In situ synthesis, microstructure, and properties, J. Eur. Ceram. Soc., 22, 14-15, pp. 2551-2554, (2002)

[4]

Palmero P., Structural ceramic nanocomposites: A review of properties and powders' synthesis methods, Nanomaterials, 5, 2, pp. 656-696, (2015)

[5]

Guo Z., Blugan G., Kirchner R., Reece M., Graule T., Kuebler J., Microstructure and electrical properties of Si3N4–TiN composites sintered by hot pressing and spark plasma sintering, Ceram. Int., 33, 7, pp. 1223-1229, (2007)

[6]

Evdokimov A.A., Sivkov A.A., Gerasimov D.Y., Obtaining ceramics based on Si3N4 and TiN by spark plasma sintering, Glass Ceram., 72, 9, pp. 381-386, (2016)

[7]

Yoshimura M., Komura O., Yamakawa A., Microstructure and tribological properties of nanosized Si3N4 , Scr. Mater., 44, pp. 1517-1521, (2001)

[8]

Merzhanov A.G., Borovinskaya I.P., Historical retrospective of SHS: An autoreview, Int. J. Self-Propag. High-Temp. Synth., 17, 4, pp. 242-265, (2008)

[9]

Nitride Ceramics: Combustion Synthesis, Properties, and Applications

[10]

Amosov A.P., Borovinskaya I.P., Merzhanov A.G., Sytchev A.E., Principles and methods for regulation of dispersed structure of SHS powders: From monocrystallites to nanoparticles, Int. J. Self-Propag. High-Temp. Synth., 14, 1, pp. 165-186, (2005)

← 1 2 →